rat rig filter system update
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More tightly integrated filter system for rat rig v-core 4
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My update to the filter system for the rat rig v-core 4. I found the original a bit lacking in both design and function. As other remixes have pointed out, it's quite difficult to get replacement filters in North America. Looks like there is a great vendor for the filters in Europe, but shipping is quite expensive and I had trouble locating the same size hepa13 filter. I picked a couple readily accessible filters on Amazon to use for this update:
More importantly here though is mounting system for this update. When going the smaller route, it's a perfect fit for 2 of these units (I have the big v-core 4) on the back panel and they will exhaust clean air into the printer workspace. I'll also upload an additional design that I realized after getting all this installed. I broke up the back panel (actually all panels) in my build into 2 pieces so I can easily source the parts at Send Cut Send, but this install still required me to unmount the back electronics enclosure, which is a giant pain in the ass. I've updated the panel design to allow for the upper panel to be removed at any time without having to unmount the electronics box, which I can imagine would be quite helpful.
I printed the cage as 2 parts, the inner body which seats in the back panel and locks the main body into place, but it's conceivable that it could be printed as a single part of one wanted, would just need a large support structure.
Important to note - all the models had to be changed from the stock setup. It may or may not be 100% compatible with the existing blower cage and filter cover, not sure as I printed everything here.