iPad Mini hood/visor/shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a sun shield/visor/hood for my buddy's DJI Phantom quadcopter. Printable in three parts on a standard 200mm x…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 898
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a sun shield/visor/hood for my buddy's DJI Phantom quadcopter.
Printable in three parts on a standard 200mm x 200mm bed.
Print Settings
Printer:
i300Pro
Rafts:
No
Supports:
Yes
Resolution:
.24 mm
Infill:
20%
Notes:
Printed with 3 outlines/shells using a 0.4mm nozzle. Each piece took about 1.5 hours to print.
Designed for home button and lightning connector on the right. Should fit snuggly over iPad Mini 2, 3 or 4. Best printed in black. Walls are 0.9mm thick--usually 4 layers.
Post-Printing
Assembly
Break off supports if you printed with them (may not need then, but doesn't add much time.
Put sides on first, and then drops and swivel in the top. When you clamp into the Phantom's holder, the top will stay down securely.
How I Designed This
Designed using Onshape, digital caliper, and a bit of gumption.
Category: Tablet