1 / 5
Yamaha YPAO Microphone Case — zdjęcie 1
1 / 5

Yamaha YPAO Microphone Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case and reel for winding and storing Yamaha YPAO microphones

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
1
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial

This is a case and reel for winding and storing the Yamaha YPAO microphones. Just place the microphone in the middle and wind the cord on the reel. Place the cover on top to protect it.

All of the parts are printed using standard settings. The reel top and the bearing retainer are glued in place using CA. I printed the lid on the textured powder coated sheet. Threaded brass inserts are used. The screw for the knob is assembled using loctite, tighten an appropriate amount, then let it set before using...for a day.

Hardware...

608Z bearing, 22mm x 7 mm with 8mm hole

M4x20 countersunk screw for base

M4x25 countersunk screw for handle

M4xD6xL4 brass threaded inserts

Let me know if you have any questions.

Tagi