Yamaha YPAO Microphone Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case and reel for winding and storing Yamaha YPAO microphones
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 1
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
This is a case and reel for winding and storing the Yamaha YPAO microphones. Just place the microphone in the middle and wind the cord on the reel. Place the cover on top to protect it.
All of the parts are printed using standard settings. The reel top and the bearing retainer are glued in place using CA. I printed the lid on the textured powder coated sheet. Threaded brass inserts are used. The screw for the knob is assembled using loctite, tighten an appropriate amount, then let it set before using...for a day.
Hardware...
608Z bearing, 22mm x 7 mm with 8mm hole
M4x20 countersunk screw for base
M4x25 countersunk screw for handle
M4xD6xL4 brass threaded inserts
Let me know if you have any questions.