Clip-on Tracker Enclosure – A Quick-Fix Solution for Broken Mounting Points
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on repair enclosure for pet GPS trackers with broken mounting points. Slides on to restore secure attachment.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
Clip-on Tracker Enclosure – A Quick-Fix Solution for Broken Mounting Points
Many dog and cat GPS trackers have mounting points that tend to break easily over time. This clip-on enclosure provides a simple repair solution by sliding over the tracker body and restoring a secure attachment.
Main dimensions (internal)
Width: 30 mm
Height: 16.65 mm (lowest point)
Two versions are included:
One version features integrated snap-fit notches that grip the tracker surface; this version requires drilling small recesses using a 1.5 mm drill bit (a drill guide is provided). When using this version, test the fit gradually and deepen the holes carefully—avoid drilling through the housing to prevent damage to the electronics. The snap-fit notches are 0.5 mm deep.
The second version has no snap-fit features and can be used without any drilling.
In both cases, it is recommended to glue the enclosure to the tracker using an adhesive suitable for PE, PP, PTFE, or similar plastics. The tracker surface should be thoroughly cleaned before bonding. Standard PU or general-purpose adhesives are not sufficient—use a proper plastic adhesive (for example: Loctite Super Glue Plastics Bonding System).
The enclosure is designed to slide into place, not to be pressed on from the top, to avoid bending or damaging the part.
Printing recommendation
Print the enclosure in PETG, ABS/ASA, PC, or a comparable plastic with sufficient mechanical strength and durability for outdoor and mechanical stress.
Note
The same version of this model is also available on Thingiverse. For documentation, printing instructions, updates, and the changelog, visit: https://www.thingiverse.com/thing:7261058
License
Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
You are free to:
Share — copy and redistribute the model in any medium or format
Adapt — remix, transform, and build upon the model
Use commercially
Under the following terms:
Attribution — You must give appropriate credit to the original author
ShareAlike — If you modify the model, you must distribute your contributions under the same license
This model is provided as-is, without warranty. Use at your own risk.