Liczymy pasujące modele…
Inspired by Adam Knepper's design, I have designed this from scratch. All sizes in mm, except for the clamp which is ~1". Added diagonal supports making this version significantly stronger. Also reduced the diameter of the clamp slightly…
For some quick and easy videos, I designed this mount to attach a camera to the printhead. In my case its the GoPro Session, but really any camera with the screwable case works. Only the weight may be problematic at some point, but with a…
This model is remix-ready, you can easily design your own attachment based upon the provided insert that goes into the dovetail rail. Overall it can be easily adjusted to your needs by using the provided fusion file. Printing information:…
Protective pad for screw in router attachement for Mensela (Dremel-like) tool. This pad is designed to protect the plastic surface from potential damage caused by the screw, minimize play between components, and enhance clamping force.…
Threaded FOXBAT Muzzle System SCAR, MEGA, MEGA XL muzzles or cosmetic muzzles just for the looks (screw barrel attachments directly onto the blaster) The Silly SCAR also fits and works with it if you use a 10" or 25,4cm aluminium barrel…
This adaptater can be fitted to a bag using tie warp and a bit of sewing. We use a bag made to protect clothe that we bougth second hand. I have a black and decker leafblower and it does fit very well, let me know in the comment if it…
Revolver Holster for my Ruger LCRx 3inch Modular Spine System -> Yesss heavy influence from TREX ARMS Sidecar 2.0 The Spine System has Loops & Spaces in 0.25 inch / 6.35mm increments The “Friction Washer” is not necessary to print. The…
It is a remix of the ikea billy holder, so that anyone can attach their needed hooks or whatever, without big editing. No matter on which side of the Billy the holder should be placed. There is also a file to print if you dont know if the…
I have been spending a cold winter building an arcade unit. No style, lots of substance. Picked up a Spintrak arcade spinner for Arkanoid, Warlords, etc but did not want to drop the 70 USD for a stearing wheel accessory. Prints in three…
A Symmetrical Bracket designed to mount VFD to Lathe with: 40 Al extrusion like Item Profil 8 40x40 1-3 M8 Countersunk Screws DIN 7991 M8 T-Nuts DIN 508 Printed in ABS 3 Walls, 20% Infill Should be fine to Hold 1-4Kg Components depending…
Spool Holder Attachment for 608zz ball bearing - 8x22x7 size. Its an attachment used to hold different spool sizes less than 74 mm. this will improvise the existing spool holder to hold multiple spools. (<74 mm) however your spool should…
There was some sort of belt clip/holder/thingy on my Parkside (X20V) drill and I thought I might not need that ever, so I unscrewed it and designed this model. I was initially designed for some bar magnets (60 x 13.5 x 5 mm) I had lying…
Added easy to use modular attachement at the back of the case, which can be used to mount different types of modules. Low tolerances and click holes make sure the phone stays properly attached and won't fall off. Created 3 additional…
An N-strike stock attachement point that can attach to picatinny, in this case the back of this mod kit. Great mod kit btw!
These are intended for temporarily placing your kayak paddle while fishing. They will not clamp the paddle down they just give you a place to set it down. These should be printed in pairs. You may find some of my other kayak fishing…
This is a magnetic attachement for the prusa CoreScrubber Fan. It can be attached on the existing model. You need 16 2x6x20mm neodynium magnets.
I used this with the Threadboard system so I can add it to my butcher blocks, close to my printers. I noticed when making it and testing, some attachments are bigger than others. This makes it difficult to get all the slots to fit…
Designed in FreeCAD, printed mine on a P1S in PLA with 100% infill. I put the seams on inside surfaces. I recommend doing that, otherwise they might land on the corner of the hole for the pin and it won't fit. Otherwise it's a pretty…
This is a repair part for a Rug Doctor Hand Tool. The clear plastic part broke, so i had to model one, as i couldn't find a spare part in Germany. Not the cleanest model as i'm still a 3d modelling beginner, but it works. :-) I printed it…
I've made a attachement for the roofrack on the Defender so it fits 2 1:10 scale Canadian canoe's. Because of the flexibility of the roofrack, you can still reach the pins on the top by tilting the canoe's to the side. If you print the…
This is an adapter for a baby cam attachement. The orignal attachement broke at an easily spottable weak point. Unfortunately, given the design of the attachement, 3D printing the whole piece would have not fixed the design flaw. Instead,…
Allows you to mount Bosch 18V FlexiClick attachments to a wall. Notes: Depending on your preferences, you can choose to print it on the flat side without support or print it from the tool side with support. Printing it on the flat side…
Attachment for 19mm hose with press fit side. Reverse engineered from a piece used on Renault Megane engine. Printed with PA-CF for extended temperature resistance.
Inspired by Adam Knepper's design, I have designed this from scratch. All sizes in mm, except for the clamp which is ~1". Added diagonal supports making this version significantly stronger. Also reduced the diameter of the clamp slightly…
For some quick and easy videos, I designed this mount to attach a camera to the printhead. In my case its the GoPro Session, but really any camera with the screwable case works. Only the weight may be problematic at some point, but with a…
A compact remix/add-on holder for the Wera BC 7 bit set, designed to securely carry a Wera 813 bit-holding screwdriver alongside the original case. I wanted a cleaner way to keep the driver and bit set together instead of rolling around…
Really liked the original version of this, but when using the mirrored version you can't use a cable chain, so modified it so that there is a channel for the bed cables and a mount for the cable chain to attach to.
Rotary attachment for grinding the tang from frets Fits threaded foredom rotary tool from Stewmac, same threads as Dremel nose(3/4-12 thread) Hardware needed 2 - M2x5x10mm hex head bolts 2 - M2x5 nuts 1 - M3x14(or longer) 1 - M3 nut Use…
Dyson V8 Pet Furniture Attachment Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: Prusa PLA White Category: Replacement Parts
Slip on sling style mount with Pic rail attachments
Yet Another Frame Attachement is a small utility print to put your painting/picture/scene on your wall. It use a screw to fix into the wall. CAD file is present, made with FreeCAD. modify/use this as you please.
This is a universal mortising bit holder. It is not attached to the drill machine, but can be held by hand or clamped to the drill/stand. I used two 626 bearings (19 mm wide, 6 mm hole) and inserted them during printing (two times to set…
the Apollo Bird feeder (https://www.vogelwarte.ch/de/shop/nisthilfen-und-futterhaeuser/futtersaeule-apollo) lacks a plate to catch the food. here is a modular plate (40 x 40 cm) that screws in the bottom ~M20 thread of the feeder and same…
Simple yet fast entertaining stuff for the little ones. Prints without supports and I have some other models on the way.
WARNING since last update X1 will heat up if there is a M3 command at the start of the G-code Who never thought: what if my 3D printer was a 2D printer ? All you need is a M6*40 bolt and a nut to go with it, simply put the nut in the…
Mount the Chair Link on the side of the rig rather then underneath, allowing for easier folding up and removal without having to lift the entire thing to unscrew the legs, and then remove chairlink. Needs Two M8 Nuts and Bolts (25mm bolt)
Just added 16 mm to fit OneBlade Pro with comb attachement.
The cable is included with the J33 BT adapter (https://amzn.eu/d/bvBbztL). The adapter snaps right into the model, the buttons and ports are still usable and even the mic works great as a headset.
Kickstand Attachement for the Samsung Z Fold 4 Standing Case, you will need a separate kickstand that can fit in the slot, the one I used is "Kinizuxi " brand from Amazon and has the following dimensions: 15mm 63.5mm 4.35mm Can be either…
Raspberry Pi B+ Bumper with attachement Category: Electronics
Small attachement for your vacuum to suck all the air out of your inflatables. Inner diameter: 34.6mm
WARNING: The two new screws holes which this model is adding to the GPS mount might not be at the same location as the one on Garmin's mount. This is, to my knowledge, only compatible with…
I personally prefer the tight fit one as it is a more updated model but the looser one works better for older not so standard screw-heads. (no supports needed) Uploaded 2 STL files. A tight fit for your screw heads and a more loose fit,…
Slanted penholder part for the ‘Bauhaus tray’ Remix designed by R_vdk, Credits to the original creator Printtime 26h 55min Weight 186.20 g Dimensions 170 x 114 x 40mm Application / Functions I needed a good desk organizer for my working…
Bought a new vacuum and wanted to use an old attachment. So I made this model up. TBH - it took about 5 tries to get it right for such a simple model. I think I need to upgrade my calipers. Model was printed with .6mm nozzle and black…
I used a USB OV5640 camera with a 160 degree lens I scavenged off of another OV5640. Lights are a 5v white USB LED strip. Printed out of PETG with 5 perimeters, 5 top/bottom layers, and 25% infill. To mount the LED strip, cut the USB…
Features: Ensures the light switch turned on all the time Can be attached without disassembling the light switch itself Keeps the remote from rotating by attaching directly to the switch (without the magnetic plate)
The idea by "jgennari " and " Caleh " to use the Fluke multimeter's probe mounts is cool, but my multimeter model and size is different. So I designed it in a way to be adjustable for any type and size. The probe mounts on my multimeter…
I wanted an attachement that I could use with my XREXS Vacuum that I purchased so I could vacuum out the air in the resealable bags after putting some silica in there. I live where there isn't a lot of humidity so I primarily use this for…
This holder allows you to place your extension cord socket from the bottom of the table. The socket is attached by 3,5-4mm zip-tie. There is enough clearance even for bigger plugs/chargers. Pro tip: Print in black for gaming purposes. No…
A remix of @TaylorSteinf_1252185 QUICK-CLIP (GEN 3) to allow the attachment of 25mm webbing. Buy me a Coffee If you like this design and would like to support me, please consider buying me a coffee
Made this for General Project surface Use to solder on, Glue On, Paint On then reprint once warn out. Basically a work surface to protect my desk. I included pre-threaded attachment points, a rim to keep screws from rolling off. But, I…
This is an improved version of a previous model I made. This version allows you to use standard drum rims and tension rods and is printed in PLA. Special thanks to smiley8476@smiley8476_430107 for helping me troubleshoot this design! (…
I started with a Dive Rite QRM universal adapter, but found that it wasn't ideal for my Big Blue TL3800P light head since the light tended to rotate, and the rear ziptie tended to slip off the light head. I also didn't like the BigBlue…
Schnell und einfach Kleiderbügel vor dem Einräumen am PAX parken! Attach your clothes hanger easy and simple on a PAX cabinet! Habe meine in weißem PLA gedruckt damit die Halter zu den Türen passen (siehe Bilder), kann aber in jeder…
Remix of the slanted pen attachment from Rvdk. Added two rows for six pens in total. Also slightly altered the other openings. Happy printing!
Before modifying, secure the drill against switching on!!! Pull out the power plug!!! This is an attachment for drill chucks (D31.3mm), into which a soldering iron (D20mm) is clamped to serve as a melting device on a pillar drill.…
This is a filter holder to attach to the 80mm fan for 80x80x10mm filters optionally a cover cap with Snapmaker 2.0 inscription 0.2 Layer no supports…
Connector between the exhaust of the Dewalt 735 Planer to the Black&Decker leaf collection system . Wood chips are neatly collected in a trash can.
Had more compact threaded Quick Connect fittings, I adjusted the design to better fit.
Mit diesem Aufsatz für den Gravitrax PowerStarter kannst du das Loch, das in den Starter führt, in deine Gravitrax Bahn integrieren. ---------------- With this attachment for the Gravitrax PowerStarter you can integrate the hole that…
This model is for attaching carabiners on a backpack with small holes for a zip tie to prevent them from moving. They can be installed by sliding them up the shoulder straps and add a small zip tie to secure them to the grab handle.…
Bicycle attachment hook to add mirrors to the bike. The mirror itself needs to be threaded and fit a M10 nut. The nut fits inside the attachment and then you can pass the mirror inside the adapter. The design was made on Solid Edge, but…
This model is remix-ready, you can easily design your own attachment based upon the provided insert that goes into the dovetail rail. Overall it can be easily adjusted to your needs by using the provided fusion file. Printing information:…
Holds New Milwaukee Shockwave boxes larger version, can be a bit tight. The idea came from moldel https://www.printables.com/model/125957-milwaukee-shockwave-box-holder Thank you. Reccomended: Print with 3 walls
I designed a small deck box that fits sleeved or double-sleeved Yu-Gi-Oh! cards. The box is lockable, and the side deck can slide out for easier access during a game. I’ve uploaded different sizes for the main deck, with options for 40 to…
This is a Dyson V10 attachement to allow a 3/4" pipe to press-fit in adapter with button. Also designed a point tip for the other end of pipe to clean hard to reach area. Post-Printing Attach the button with a pin/nail/paper clip and some…
