Hand Towel Rack Clip (with 福/Fu)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hand towel rack clip with or without 福/Fu
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 102
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bambu profile available at MW.
Hand Towel Rack Clip (with 福)
In our house, freshly hung hand towels tend to migrate to the floor in about 20 minutes. I won’t name names, but all suspects are under 18.
So I designed a simple solution.
This clip attaches to a standard towel bar and holds the towel securely, making it much harder for it to slide off.
Features
Designed for ~16 mm towel rack bars
Keeps towels from sliding off or falling to the floor
Quick one-piece print
Optional 福 ("Fu" – good fortune) character on the side
Character is only on one side, so you can hide it by flipping the clip
Includes a version without the character
Print Notes
Default profile: 0.20 mm layer height
PETG recommended for flexibility
PLA will work but may be a bit more rigid
Prints quickly and cleanly without special settings
I measured the two most common towel racks in our house (both ~16 mm diameter) and left a bit of clearance so towels slide in easily but stay in place.
Bonus: the 福 character means “good fortune.”
And yes — it’s intentionally right side up, unlike the upside-down versions sometimes hung during Chinese New Year.