1 / 4
140mm Fan Stand with Powerbank Holder — zdjęcie 1
1 / 4

140mm Fan Stand with Powerbank Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a universal fan stand which can be used to place a powerbank powered 140mm fan wherever you want.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Description

This is a 140mm version of my 120mm Fan Stand with Powerbank. Please see the original model for a more detailed description.

Parts

Required Parts

For this 140mm version you will need to print:

  • 1x fan_holder_140mm.stl

  • 1x fan_holder_140mm.stl mirrored

Optional Parts

I'd advice you also print or use:

  • 2x fanGrill_140mm_domed.stl, or

  • alternatively use a metal fan grill

  • 2x cylinder_new.stl

  • 2x infan_spacer.stl (for felt stickers; alternative: use 4x cylinder_new.stl)

Optionally, you can improve stability with:

  • connector_backside_nuts.stl

If you want to use the same powerbank I used (POWERADD EnergyCell 5000mAh Mini Power Bank) you'll need fitting holders:

  • 1x powerbank_holder.stl

  • 1x powerbank_holder +20mm.stl
    ONE of them must be mirrored!

PCB Holder

If you want to design your own PCB holder (e.g. for a breakout board), the hole distances are 128mm x 30mm. A third hole on each side allows for 128mm x 15mm as well. The hole diameter is 3.5mm.

Power Supply

You will need step-up converter to provide the fan with 12V, as the USB will only provide you with 5V. I used a custom designed PCB for this which perfectly fit the original 120mm version and also improved mechanical stability. You can use any breakout board from e.g. Amazon. In that case you might want to design a simple holding plate that you can screw into the fan holder parts.

Tagi