140mm Fan Stand with Powerbank Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a universal fan stand which can be used to place a powerbank powered 140mm fan wherever you want.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This is a 140mm version of my 120mm Fan Stand with Powerbank. Please see the original model for a more detailed description.
Parts
Required Parts
For this 140mm version you will need to print:
1x fan_holder_140mm.stl
1x fan_holder_140mm.stl mirrored
Optional Parts
I'd advice you also print or use:
2x fanGrill_140mm_domed.stl, or
alternatively use a metal fan grill
2x cylinder_new.stl
2x infan_spacer.stl (for felt stickers; alternative: use 4x cylinder_new.stl)
Optionally, you can improve stability with:
connector_backside_nuts.stl
If you want to use the same powerbank I used (POWERADD EnergyCell 5000mAh Mini Power Bank) you'll need fitting holders:
1x powerbank_holder.stl
1x powerbank_holder +20mm.stl
ONE of them must be mirrored!
PCB Holder
If you want to design your own PCB holder (e.g. for a breakout board), the hole distances are 128mm x 30mm. A third hole on each side allows for 128mm x 15mm as well. The hole diameter is 3.5mm.
Power Supply
You will need step-up converter to provide the fan with 12V, as the USB will only provide you with 5V. I used a custom designed PCB for this which perfectly fit the original 120mm version and also improved mechanical stability. You can use any breakout board from e.g. Amazon. In that case you might want to design a simple holding plate that you can screw into the fan holder parts.