Universal/MacBook Laptop Vertical Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adjustable vertical stand for laptops.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Looked around and found that most vertical stands were not adjustable so I made one. I wanted it adjustable to accommodate all sorts of laptops. Being adjustable also came in useful since I did not know how thick the felt pads were going to be. I simply loosen it up, have the stand lightly touch the sides of the laptop and tighten up the bottom screws.
Hardware:
Four (4) M5x16mm button heads screws
Four (4) M5 brass inserts
E6000 adhesive to bond the felt to the stand, E6000 also works on PLA.
Print Settings:
Material: Polymaker ASA, although PLA can be used.
Infill: Gyroid @ 10%
Wall perimeters: 4
Top and bottom layers: 5