Universal/MacBook Laptop Vertical Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adjustable vertical stand for laptops.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 68
- Makes
- 0
- Views
- 565
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Looked around and found that most vertical stands were not adjustable so I made one. I wanted it adjustable to accommodate all sorts of laptops. Being adjustable also came in useful since I did not know how thick the felt pads were going to be. I simply loosen it up, have the stand lightly touch the sides of the laptop and tighten up the bottom screws.
Hardware:
Four (4) M5x16mm button heads screws
Four (4) M5 brass inserts
E6000 adhesive to bond the felt to the stand, E6000 also works on PLA.
Print Settings:
Material: Polymaker ASA, although PLA can be used.
Infill: Gyroid @ 10%
Wall perimeters: 4
Top and bottom layers: 5