Ikea RIKLIG teapot Hario Switch adapter lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lid for IKEA RIKLIG 0.6L teapot to place the Hario Switch dripper on top of it and use it as a coffee server
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a replacement lid for the IKEA RIKLIG teapot that allows it to place a Hario Switch dripper on top of it and function as a coffee server.
This works with the 0.6L version of the teapot and it snaps into place just like the factory one.
I use it daily with my Hario Switch in the 03 size, as far as I know all Hario switch brewers use the same rubber base so it should also work if you have the 02 size Switch.
I currently do not own a regular v60 so I was not able to check if this works with it but looking at the dimensions it would allow you to place a v60 dripper on top of this lid and brew coffe, even if it might not need it as the base of the v60 is wider than the base of the Hario Switch.
It also works with the Aeropress!
A bonus is that you can use the original lid with its filter directly on a mug to brew tea (last picture).
I printed it in PETG and I suggest you do the same, as PLA might deform due to the steam.
I used a bambulab A1 and printed it with a 0.6mm nozzle.
