IKEA Ivar Phone Charging Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Phone Charging Hub fits to the side of an IKEA Ivar system and eliminates cable chaos in your living room or office
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This model combines 3D printing and wood to create a practical phone-charging sideboard for your IKEA Ivar system.
It consists of two side panels that can be adjusted to fit a wooden plank of your choice between them. The .3mf files are designed for a 145 mm x 18 mm plank.
The .f3d file can be found in the folder, allowing you to customise the design as desired.
There is also an additional cable holder that can be attached to the Ivar and holds up to three different cables, managing them in a tidy way so that they are easy to grab when you need them. I printed it laying on the side and used organic support to print the cable channels.
I printed all the parts in PETG, but PLA should work well too. I went with 2 perimeters and 20% gyroid infill.