Virtual Boy Tripod Mount - Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is our Virtual Boy Tripod mount, designed to make it easy to use a Virtual Boy with a normal 1/4" Tripod screw.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 737
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you don't have a printer check out my stores, I sell some of my designs printed with everything you'll need:
etsy -
http://www.16bitgamestore.etsy.com/
eBay -
https://www.ebay.ca/usr/16bitvideogamestore
To assemble this Kit, you will need x3 10-32 ½" Screw and Nut, x1 10-32 1" Screw, and a 10-32 Wing Nut, x1 ¼" Nut, and (Optional) #16 Rubber Band.
Screw the 1" Screw into Adapter, and place the Plug behind it. Next Hammer in the 10-32 Nuts into their slots, and place the ¼" nut into the mount. Afterwords thread the rubber band in the guide with a sim card removal tool, or a thin piece of metal. Finally screw Mount into the adapter with the 10-32 screws, and the A Side, and place the B Side in with the Wing Nut behind it.