FCOB Holder for V-Core 4 500
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 piece holder for FCOB for the V-Core 4 500
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
FCOB Light Holder
This is a simple two-part holder designed to securely mount an FCOB LED strip to a 3030 extrusion. The design allows for easy installation and clean wire routing, making it suitable for enclosed printers such as the VCore 4.
Bill of Materials (BOM)
4 × M3 3030 hammer nuts or T-nuts
4 × M3 × 10 mm screws
Installation Instructions
Join the two printed parts together using the provided joiner piece.
Glue the assembled holder using polyurethane glue and allow it to fully cure before installation.
Place the FCOB LED strip into the holder and route the wiring as desired.
Mount the assembly to the 3030 extrusion using the M3 hammer nuts (or T-nuts) and M3 × 10 mm screws.