Creality K1SE Chain Link Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended Riser Link to allow you to add a drag chain to your K1SE.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An extended chain link riser for the print head of your Creality K1SE to allow you to add a drag chain with clearance.
📌 QUICK OVERVIEW
• Designed for Creality K1SE
• Enables clean cable chain routing similar to the K1C
• Replaces the stock setup
• Allows use of risers and top covers
• Works as part of a multi-model cable chain solution
Installs in the same location as the original unit.
This was specifically designed to pair with:
• Creality K1SE Rear Cable Chain Mount by Protius (shameless self-promotion)
• Creality K1 Cable Chain Sagging Fix by ViniS
• Cable Chain Link with PTFE Tube Guide by C3D Garage
Combine those pieces/parts together and you have a fantastic setup for your K1SE!
🔧 PRINTING NOTES
Printed examples were done in PLA, but PETG or ABS may also be used if preferred.
Recommended settings:
0.4 mm nozzle
Standard layer heights (0.2 mm works well)
Default wall and infill settings
Supports:
• Recommended due to the design specifics unless you opt to change print orientation.
🔩 REQUIRED HARDWARE
• None. Use the original screw to attached this to your print head.