Creality K1SE Chain Link Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extended Riser Link to allow you to add a drag chain to your K1SE.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 121
- Makes
- 0
- Views
- 389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An extended chain link riser for the print head of your Creality K1SE to allow you to add a drag chain with clearance.
📌 QUICK OVERVIEW
• Designed for Creality K1SE
• Enables clean cable chain routing similar to the K1C
• Replaces the stock setup
• Allows use of risers and top covers
• Works as part of a multi-model cable chain solution
Installs in the same location as the original unit.
This was specifically designed to pair with:
• Creality K1SE Rear Cable Chain Mount by Protius (shameless self-promotion)
• Creality K1 Cable Chain Sagging Fix by ViniS
• Cable Chain Link with PTFE Tube Guide by C3D Garage
Combine those pieces/parts together and you have a fantastic setup for your K1SE!
🔧 PRINTING NOTES
Printed examples were done in PLA, but PETG or ABS may also be used if preferred.
Recommended settings:
0.4 mm nozzle
Standard layer heights (0.2 mm works well)
Default wall and infill settings
Supports:
• Recommended due to the design specifics unless you opt to change print orientation.
🔩 REQUIRED HARDWARE
• None. Use the original screw to attached this to your print head.