Z-Stop Limit Switch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My printer (Hictop i3) came with a mount for the Z-axis endstop made out of two acrylic pieces. Of course, it doesn't…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 522
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My printer (Hictop i3) came with a mount for the Z-axis endstop made out of two acrylic pieces. Of course, it doesn't need adjusted all that often...but, when it does, I found it a bit frustrating that it requires a wrench or needlenose pliers awkwardly jammed behind the leadscrew to hold the tiny M3 and M2 nuts while adjusting.
This is a printable replacement with a few improvements:
- Captive nuts for both the limit switch screws and mounting screws
- Pins that mate into the adjustment slot for easier positioning without side-to-side movement.
- Mount is one solid piece
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes:
Recommend printing at 100% infill for structural durability but it's not critical. I printed at 0.2mm layer height for appearance but 0.3mm would also be fine.
Category: 3D Printer Parts