Z-Stop Limit Switch Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My printer (Hictop i3) came with a mount for the Z-axis endstop made out of two acrylic pieces. Of course, it doesn't…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 522
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
My printer (Hictop i3) came with a mount for the Z-axis endstop made out of two acrylic pieces. Of course, it doesn't need adjusted all that often...but, when it does, I found it a bit frustrating that it requires a wrench or needlenose pliers awkwardly jammed behind the leadscrew to hold the tiny M3 and M2 nuts while adjusting.
This is a printable replacement with a few improvements:
- Captive nuts for both the limit switch screws and mounting screws
- Pins that mate into the adjustment slot for easier positioning without side-to-side movement.
- Mount is one solid piece
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Notes:
Recommend printing at 100% infill for structural durability but it's not critical. I printed at 0.2mm layer height for appearance but 0.3mm would also be fine.
Category: 3D Printer Parts