Flower / Cactus / Succulent vase with magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vase for your plants with magnets 10x2mm
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this vase for my cacti using 10x2 mm magnets. You can make holes for magnets of your size, but keep in mind that magnets with a diameter of less than 6 mm will not hold this pot well. You can also use rectangular magnets measuring 20x10x2 mm.
The model is already configured for printing without stands. I recommend printing a model with a layer thickness of 0.15-0.2 mm and a filling of 20-30%. I also recommend using a frame about 10 mm wide to make the model stand more stable when printing.
Thank you for your attention and please leave photos of the model if you have printed it. Have a nice day!