Flower / Cactus / Succulent vase with magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A vase for your plants with magnets 10x2mm
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 79
- Makes
- 0
- Views
- 292
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this vase for my cacti using 10x2 mm magnets. You can make holes for magnets of your size, but keep in mind that magnets with a diameter of less than 6 mm will not hold this pot well. You can also use rectangular magnets measuring 20x10x2 mm.
The model is already configured for printing without stands. I recommend printing a model with a layer thickness of 0.15-0.2 mm and a filling of 20-30%. I also recommend using a frame about 10 mm wide to make the model stand more stable when printing.
Thank you for your attention and please leave photos of the model if you have printed it. Have a nice day!