IKEA Skydrag Magnet Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
End caps for the IKEA Skydrag to allow magnetic mounting.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
End cap pieces for the IKEA Skydrag linear shelf lights to allow magnets to be inserted either from the top or the side to allow non-destructive mounting of the lights.
Uses the great mount geometry from @stephenbriggs_529843 as the base which fits the light very well. Sized for 10x8mm magnets with a press fit though your printer tolerances are likely different to mine so may require adjustment.
If you wish to change the diameter or depth of the magnets used you can do so in the parametric Onshape model here:
Those two parameters are broken out as configuration items which can be changed. You can also easily suppress other items if you don't need them (e.g., change to have only one insertion direction).