433 MHz Weather Station Sensor Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix: fixed top scale for perfect fit, built-in supports for threads (no extras needed), simplified handle, all STL.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the "Weather Station Sensor" model by Pedro Vallejo.
I fixed the top piece because it was too small and didn't fit the bottom piece properly. I also added integrated supports for the threads so you don't need to add any extra supports in the slicer (they're not perfect, but the parts print reliably). The hanging handle at the top has been simplified, and I cut out the holes because they were plugged/solid in the model I downloaded.
I edited with 3D Builder and saved as STL to get rid of any embedded stuff in the 3MF files.
I personally use these 433 MHz sensors with RFLink to connect them to Home Assistant.