Liczymy pasujące modele…
Collection of washers including : M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24. For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
My Logitech G433 was broken on both Pivot Points, but i can't find Spareparts for the G433 :-(. Here are my printable Spare Part's ;-) You need: print all four Parts (two Left, two Right). 8 M3x8 Screws 8 M3 Nuts T5 Torx Screwdriver small…
So for those that have been following me for while on youtube and TinyGS, here is another treat, I have been working on multiple versions of a modified QFH antenna to get the smallest size and while keeping decent performance. This file…
The M433 Grenade in 2 different formats. A solid model and a container.Please feel free to rate and review.
TC3EC 433MHz Moxon Antenna by TA3NT For detailed information, you can read our related blog post(TR). This antenna was designed by TA3NT under the name "TC3EC Moxon Antenna" to meet the antenna needs of 433MHz LoRa Meshtastic Nodes in…
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
Update: New tuned version available, find out more http://qczek.beyondrc.com/lrs-moxon-antenna-v2-tuned/ Just a frame for DIY Moxon atenna. Find out more on my blog http://qczek.beyondrc.com/moxon-antenna-for-lrs-tx/ Just uploaded…
You need some fairly flexible plastic, although straight up flex-filament will not work. I used PETG, with some good results, but I imagine that PLA would work fine as well. Alternatively, you can download the source FreeCAD file, and…
419mhz Center Freq. Hope the bandwidth is good. This was model 100% to a the calculations of online calculations to the 0.5mm. Going to be intresting to see calculation vs result. I suspect the plastic will have effect but since center is…
This is print is designed to mount a Netatmo Outdoor module and a generic 433MHz cheap temperature sensor on a pole. It also includes two “radiation shields” which protect the sensors from direct sunlight, but allow air to flow through…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Printed on Elegoo Neptune 3 Plus
The TTGO LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in LoRa chip and an OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it…
Originally published here: 433 Eros scaled one in 500 thousand by tato_713 - Thingiverse This model was based on the Gaskell ICQ model available on the PDS site, rendered using MATLAB R2016a. The file's names explained: name_1_x_10_y.stl…
Holder for https://www.printables.com/model/843353-solder-scroll-ergonomic-adjustable-solder-tool
This is a replacement handle I modeld because mine brocke. It is made for the Koenic KTO 4331 M Toaster.
I've been looking for a clip for a garage door remote for a long time, but I couldn't find anything. I had to make my own version for a popular remote. For remotes known as Universal 4 Buttons Garage Door Opener Remote Control 433MHZ
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
case for ESP32-DevKitC V4 (ESP32-WROOM-32D) and rf 433mhz Superheterodyne modules (regular modules have components that can interfere with those mounts) requires: 2x m3 nuts 2x m3*8 screws some supports required for main body possible…
This is an esp32 enclosure for when you want to use an OLED screen and a CC1101, 433Mhz module, that entirely clicks together using snap joints. No screws are required for assembly! There are a lot of useful projects that require an esp32…
Arduino UNO R3 with 433Mhz HAT Case Enclosure The objective was to design a simple ventilated case that would suit the 433Mhz HAT mounted on top of an Arduino UNO R3. The HAT was obtained from Jonathon Oxer (Freetronics) and comprises a…
Voici la modélisation de l'amplificateur AB-IOT -433 pour le futur lora APRS BOX. @Désolé pour la précision. Don't forget to indicate that you like the model on printable.com. Please send your opinions for future improvements. and take…
Can be used for an RFLink setup for example with an Arduino Mega (with micro USB or USB-C connector), a 433 MHz superheterodyne transmitter, and a receiver with copper antennas. The case is a somewhat loose friction fit, to make it easy…
419mhz Egg Beater antenna List of parts needed. 8 feet 1/2" by 1/8" Alloy flat stock x10 3mm Plastic brass inserts x10 3x6mm screws Print Settings Resolution: 0.2 Infill: 100 Post-Printing 50mm PVC Pipe Egg Beater Category: Parts
TC3EC 433MHz Moxon Antenna Splitted By TA3TRV For 220x220mm Printer Beds Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro **Rafts:** Doesn't Matter Supports: No **Resolution:** .16 Infill: %20 **Filament:** Porima ASA Beyaz…
Moxon antenna created to be easily tuned with VNA NOTE: It only makes sense to download and build it if you have VNA and know how to use it, without it you won't be able to tune this antenna. For most cases the TC3EC Moxon Antenna (…
AKR ENGINEERING DESIGNS 3D PRINTING TWO STOREY HOUSE DETAILED MINIATURE PH:9961443300. CREALITY ENDER 3 OR OTHER PRINTER
This model is compatible with the lego system.
Hello! I wanted an easy way to display my Jango Fett Starship alongside my UCS and my 2002 models, so I designed this! Print with 5-7 perimeters and 100% infill. Layer height is less relevant. I used PLA on my XL. I'm including the STEP…
this is a miniature case for a DigiStump Attiny85 and a common 433mhz transmitter. both wired together it make for a Micro FoxHunting Transmitter on UHF/70cm band! you only need a USB power bank to plug this in and you are ready to go.…
The moxon antenna at 433 MHz is combined with the Heltec V3 board in one housing for stationary use in the Meshtastic or Meshcore network. There are two installation options: on a stem for indoor or outdoor use, and on a mast using…
Hier möchte ich, wie weiter oben beschrieben, einige Kunstoffteile des “Kleinen Uhus” hochladen da es diese schon lange nicht mehr zum nachkaufen gibt. Vielleicht kann ja irgend jemand die Sachen gebrauchen der sich mal wieder nach langer…
CUSTOMIZABLE VERSION here <- click as you might guess, I highly recommend using the customizable version, where you can tweak all the parameters to your liking, only upload stls for the versions I actually used. If you somehow cant use…
Gehäuse für die Funkfernbedienung am Chamberlain Garagentor. Ist für die alte Version mit 433 Mhz, ob es für neueren Versionen passt kann ich nicht sagen. Wenn ja, dann bitte Rückinfo ;-) Die Knöpfe sollten vor der Montage noch ein wenig…
These are distance brackets for RF door contacts (round oval transmitter PCB part, aprox 59,8 mm x 23 mm x 12,7 mm) in order to lift them by 12,5 or 26mm to be in better reach of the magnet on the other part of the door/window/lid.…
This is a small enclosure for the commonly used 433MHz RC sender module. Print instructions Printer: Prusa Mini Supports: not needed Layer height: 0.2 mm Infill: 15% Filament: Prusament Vanilla White
I got tired of finding this remote each time around different compartments of car so I decided to make a holder for it. It is actually easy to put it in as well as slide it out. I used doublesided tape from AliExpress but feel free to use…
433 MHz ASK receiver to ESP8266 based WIFI MQTT gateway Print instructions PLA, 40% infill
DollaTek 433MHz RF Transmitter Case This thing is a simple clip-on case for the common DollaTek 433MHz RF Wireless transmitter chip. It was designed in Fusion 360 and is just a simple push-fit case to house the electronics. Stopping them…
First of all, thanks to Johannes (OMG-3D) for the great push robots. These pushing robots can be controlled from the mobile phone without having to install anything on the mobile phone. You just have to call up the page on the WeMos D1…
Foldable 3 Element Tape Measure Yagi Antenna for Amateur Radio Direction Finding Very good F/B ratio for easy direction finding Ideal for Draussenfuchs [1] or Amateur Radio Direction Finding (ARDF) Light weight (around 70g, without cable)…
Small case for a 433Mhz relay board Print Settings Printer Brand: Prusa Printer: I3 MK3S Notes: to print as the black one in the photo set top and bottom layers to 0 and select the honeycomb infill Category: Electronics
This is another iteration of my cover case for esp8266 development board with 433 ASK receiver or EV1527 receiver. Check OpenMQTTGateway for more info howto interface esp8266 with EV1527 or other 433Mhz based receivers.…
This is a divider for the Makita Makstor 3.6 drawers - there are never enough of them included when you buy the Makstor.
cover suitable for the remote FAAC models XT2/XT4 433/868. Very useful to protect your remote and easy to put/remove from it! It has to be printed with TPU or any other softer filaments. Leave a like if you like it thx!
Description This case was designed from scratch for the GUITION JC4880P433 development board (ESP32-P4 with an ESP32-C6 and a 4.3" touch display). I wanted a minimalist design that holds the screen at a 60° angle (you can also rotate it…
ABB - Jussi style Light switch cover The unit hosts the KTNNKG 433MHz Universal Wireless Remote style board (KTNN-YK86-A3) with 27A battery. Assembly: The circuit board goes back, buttons in the holder from the top after the battery…
Seems to be a common issue, but the keyring notch for this remote is too flimsy and breaks down quite easily. This model isn't a “true” rendition as the original one. This is a 3D printer friendly version, with no overhangs or bridges. If…
Seems to be a common issue, but the keyring notch for this remote is too flimsy and breaks down quite easily. If you still have the original in good shape, I suggest you look at Eddie Green's idea , which was the inspiration for this…
Dies ist eine Halterung für einen Funkempfänger des oben genannten Modellles (gibt auch einBild vom Funkempfänger). Der Deckel lässt sich schieben und hat ein Loch für die Antenne, welche man optional an den Funkempfänger löten kann.…
Use to add a roller to your digital calipers. The holder is specifically sized to fit onto the General UltraTech No. 1433 (3") calipers, but should also fit the No. 146 (6") calipers which appear to use the same slider assembly. The wheel…
I wanted to use this 433Mhz remote control relay with 30v, but it need 12v to function to I created this case to house it and an LM2596 buck converter. (LM2596 module will only convert to 12v for control, while output voltage stay the…
Holder for a tedeligo remote control. To get the remote out of the holder you can push the keyholder up. Printed in PETG; Nozzle 0,4mm; 0,2mmlayer hight; 5 layers wall, bottom, top; 25%infill; support everywhere. Printed flat to get the…
a quick and simple model for a replacement bandsaw table insert, specifically made for Holzkraft HBS 433 531 431 533
This is a 3D-printed cylindrical case designed for general electronic or mechanical projects. It features two closing caps with 0.3 mm clearance for a snug fit — optimized for PLA on FDM printers. I made it for my dad's hobby, he is happy…
compact case holding a esp32 wroom dev board plus cc1101 in the most compact way, by building a sandwich. see pictures for details. can be used for espsomfy or to control other 433mhz devices
Model to replace the IKEA part #156433 Finnala Sofa and Ottoman Connector
Recently the plastic clips of my Toyota Yaris 2024 gave out, so I decided to reverse engineer them. Searching for them on the secondhand market I was stunned because they didn't sell the clips alone. They are made of a crappy PP blend…
The buttons are cheap and use the EV1527 code. They're available in at least white housings with red, yellow, green or blue ring. ZigBee versions in similar looking cases are also available (one version is a sos button), but I haven't…
Just a mounting bracket for the DAC dongle that comes with the Logitech G433 headphones. It may come with other models too. I made this so I could mount the DAC and the headphone holder completely under the desk with a USB extension…
See attached files for all details. PETG Printed with 3 small supports to ensure quality.
This a cheaper implementation of a single button module, similar to the Amazon Dash button, which were a convenient thing in the past, dedicated to a single product, and with the press of a button, you can order an item. Amazon stopped…
Inspired by the Wyze Garage Door Bracket. Really great idea scrolled by it several times thinking it had to fit over a hinge when all it needed was gravity. This is made to fit the 433mhz door sensor GS-WDS07…
Summary Round-to-round cone adapter that connects the Ridgid R4331 13-Inch Thickness Planer OEM dust port piece to a standard 4" dust collection hose. Simple straight cone design — the OEM adapter slides into one end, your 4" flex hose…
I lost the original screws for the case and didn't want to carry an exposed PCB, so I designed a 3D printable case. You do need to remove the plastic connector for it to fit (not pictured - removed & binned) (or you can modify the CAD…
AKR ENGINEERING DESIGNS 3D PRINTED DOORS AND WINDOWS DESIGN. PH:9961443300.
This 3D-printed wall mount is designed to securely house the Moes ZigBee RF433 Smart Curtain Module within a standard European flush-mounted electrical box. It offers a clean and integrated installation. 🔧 Features Three-Part Design :…
PLA, Layer 0.2mm, Infill: 15%
Gehäuse für einen 433MHz Sende Modul. Dies ist eine Sendeeinheit zum steuern einer Empasa Markise über Homeassistant. Aufgebaut auf einen ESP32 mit einem CC1101 Funk-Modul, 433 MHz, Langstrecken-Wireless-Transceiver-Modul. Mit ESPHome…
These custom buttons add clear function labels to a standard 433 MHz remote used with the Nautinect DIY Autopilot project. The markings make it easier to identify each button's function at a glance while operating the autopilot. Link to…
This is a remote model for a 4 channel RF remote.
This is a 3D-printed enclosure designed specifically for the TX118A 4-channel 433MHz transmitter module. I designed this case to be a fully standalone, portable remote, so it includes enough internal space to comfortably fit a small LiPo…
I lost the original screws for the case and didn't want to carry an exposed PCB, so I designed a 3D printable case. You do need to remove the plastic connector for it to fit (not pictured - removed & binned) (or you can modify the CAD…
This a cheaper implementation of a single button module, similar to the Amazon Dash button, which were a convenient thing in the past, dedicated to a single product, and with the press of a button, you can order an item. Amazon stopped…
This is a remote model for a 4 channel RF remote.
CUSTOMIZABLE VERSION here <- click as you might guess, I highly recommend using the customizable version, where you can tweak all the parameters to your liking, only upload stls for the versions I actually used. If you somehow cant use…
The buttons are cheap and use the EV1527 code. They're available in at least white housings with red, yellow, green or blue ring. ZigBee versions in similar looking cases are also available (one version is a sos button), but I haven't…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Hose stop for Nederman compressed air hose reel (part no. 833-30372433) If you’re unable to print it yourself, you can…
One small plastic part broken - all machine broken? Some grass got rolled in between bearing and housing, got pushed away to the side, partially melted.... Took dimensions, designed in CAD, printed in PETG; up and running again! Let's see…
ORGANIZZATORE GT433 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Key chain 433MHz remote controls typically have 4 buttons and often only one is used. The remotes are small and fiddly to use in a car or to mount on a wall. This design solves that problem. Program button A to be active and remove the…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
I use this antenna with my RTL SDR blog V4 with Home Assistant. nothing special but easily removable from the wall and probably useable for other small antennas too. I use PETG for this
IT'S A DETAILED AND SINGLE PIECE BODY WITH AXLE ATTATCHED. MODIFICATION ON WHEELS REQUIRED. FOR ANY QUERRIES OR ORDERS YOU CAN CONTACT ME ON WHATSAPP - 9961443300
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
This is a remix of the "Weather Station Sensor" model by Pedro Vallejo. I fixed the top piece because it was too small and didn't fit the bottom piece properly. I also added integrated supports for the threads so you don't need to add any…
This model is compatible with the lego system.
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Hose stop for Nederman compressed air hose reel (part no. 833-30372433) If you’re unable to print it yourself, you can…
This is a custom designed enclosure for the QIACHIP 433MHz Universal Wireless RF Relay Receiver (1-Channel) compatible with DC 6V, 12V, and 24V versions. Purchase here - https://amzn.to/4fbr0JI The enclosure was designed from scratch to…
I bought these little 433 mhz receivers and transmitters off of ebay for dirt cheap. I used the receiver to record the fan command signals. The ESP listens to MQTT messages from Home Assistant and sends the signals to my ceiling fan…
Printed in white PLA with 0.2mm layer height. Pause the print at layer 21 to insert a 6mm X 2mm magnet - make sure you have the correct pole facing up. Update 26/02/21 I've only just realised I uploaded the model without space for the…
as the previous housing was just IP44 (light rain) protected (see https://www.printables.com/model/514839) this is roof housing is to cover from direct rain, spray and wet hands (IP54) additional materials needed: switch electronics from…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Case for 433 MHz amplifier ( aliexpress.com ), which protects the components on the PCB. Printing with supports, Infill: 15%. Share your printed model.
![Display Stand for LEGO Star Wars Slave-I 75243 / 8097 / 7153 / 75312 / 7144 / 75433 [last update 29.08.2024]](https://media.printables.com/media/prints/837656/images/6658232_f487673a-44ff-4c9c-990e-3e1b534596f7_b4e53416-be56-41b3-8f60-86a7f23726da/slave.jpg)
