1 / 3
Key Chain 433 MHz Garage Door Opener Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Key chain type remote control holder typically used for garage door or gates.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Key chain 433MHz remote controls typically have 4 buttons and often only one is used. The remotes are small and fiddly to use in a car or to mount on a wall. This design solves that problem.
Program button A to be active and remove the black slider. This is possible without removing the back of the 433 MHz remote case, be careful not to stab yourself with a screwdriver when prying the slider off.
I printed it in ABS at 15% infill but will also be using my new orange Prusament for the next one I print.