BlazeClaw – Rare Berserker (Full-Body Statue + Framed Wall Mask Plaque) | Print-Ready
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rare berserker BlazeClaw: full-body statue + framed wall mask plaque. High detail, print-ready display set.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Meet BlazeClaw, the Rare Berserker of the Crimson Howl — a feral, molten predator forged in the Crimson Chasm.
This is a print-ready display bundle designed to look great straight off the printer in a single filament colour:
✅ Full-body statue (dynamic crouched/pounce pose)
✅ Framed wall plaque (BlazeClaw mask bas-relief with flat back)
The sculpt style is clean, high-contrast and detail-forward, so the cracks, fur, claws and rock base read clearly even without paint.
Card Quote:
“Blazeclaw never retreats, not even from the inferno.”
What’s Included
Full-Body Statue (display base + character)
Framed Wall Mask Plaque (support-free, flat back)
Print Notes (Bambu A1 / AMS friendly)
Recommended (PLA / Matte PLA):
Layer height: 0.16mm (0.20mm for fast)
Walls: 3–4
Infill: 10–15% (gyroid)
Supports: Statue = Yes (tree/organic), Plaque = No
Brim: Yes (helps stability on the statue pose)
Finish tip (no paint): Matte PLA shows the detail best and hides layer lines nicely.