Liczymy pasujące modele…
Camera Mount I build this mount to attach this Raspberry Pi Infrared Night Vision Camera with infrared spots to a flat surface (an existing pi case in my case). The pi camera should have been adjustable (direction / angle). I used some…
GGs Looper! Are you tired of boring standard loot from standard chests ? Do you want some rare stuff? OK, take this rare blue chest for some fantastic loot! This was more work than I initially thought. But now it is finally finished:…
angled mount will fit small and bigger thermometers, with openings from 12mm up use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4…
Small holder for Infrared Thermometer for the Ikea Skadis board. Fits Thermometers with Ø15mm opening. Print with solid infill. The thermometer applies some force on the holder, so I printed with PETG. It works good. The design is focused…
Case for TRCT5000 infrared sensors with positioning help. Fits easily and needs no screws. If you want to see the status LEDs, just print the top part with transparent or white filament. Print Settings Printer Brand: Creality Printer:…
Small holder for Infrared Thermometer for the Ikea Skadis board. Fits Thermometers with Ø15mm opening. Has a bit tilted nose 15° for a more secure hold. Uses universal hook to mount.
it is renegade raider doesn't matter about filament or printer
Made a case for my ESP8285 ESP-01M IR Infrared Transmitter Module that I use as remote for my TV with Home Assistant I used ESPHome remote transmitter https://esphome.io/components/remote_transmitter.html with the IR remote codes from…
This is a suit of armor befitting the esteemed Flipper Zero IR Blaster, forged by the renowned Rabbit-Labs. Armed with seven luminous hyperintensity LED emitters, this apparatus harnesses the power of infrared transmissions to command the…
Simple mount to keep the Thermometer secure and in one place
holder for Infrared Thermometer for the Honeycombstoragewall.
I think this other remote design is more common, so check this one before printing this design: https://www.thingiverse.com/thing:6935355 But if that design doesn't fit your remote, maybe see if this one will fit.
I wanted a wooden barrel top from some of my favorite bourbon and whisky brands. You could very easily paint this to give the grain look or whatever. Created this for fun in hopes others like it! I designed it at 150MM wanting to ensure…
I remixed the wall mount, because I wanted to have two screw holes with a bevel, no text and round corners. Thanks to LICK_THE_BUTTER for the inital work. No supports needed!
Remix for small holder for Infrared Thermometer for the Ikea Skadis board and Küpper EU board to fit thermometers with Ø17mm opening. Print with 100% infill.
Meet BlazeClaw , the Rare Berserker of the Crimson Howl — a feral, molten predator forged in the Crimson Chasm . This is a print-ready display bundle designed to look great straight off the printer in a single filament colour: ✅ Full-body…
Simple pegboard holder for infrared thermometer. Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world with same diameters.
A small charm with added loop for mounting. An easy build that requires minor gluing. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece.…
This is a pegboard mount for my infrared temperature gun. I wanted a pegboard mount that didn't take up too much space and that looked nice, which seemed tricky for the temperature gun design, so I came up with this and am quite pleased…
This is a shell design for The Rare Arms AR-15 Airsoft Gun. These shells hold 3 BB's each, turning it into a shotgun. With one BB the accuracy is hilariously bad but with 3 the grouping become much tighter. I only play CQB and the gun…
The Mantis case features an open frame housing for better cooling of the LEDs. Its swivel base will help you position it on a Pi case, wall or other surface where you can either apply doublesided tape or screws. For assembly material…
A simple holder for Multiboard. Uses the big snap, so no additional snaps needed. Print with 0.2 mm layer height and supports.
I adjusted it to fit a 14mm thermometer. And also made a hole in the middle to save filament
requires drilling for mounts and the JUL rear mount is required but that's it. I have put days into making this work so enjoy the classic truck and you might see a truck version and a no top version will be making accessories for this Rc…
UPDATE: Added a pegboard version of this mount using Sy's Peglock System design. I picked up an AMES Instruments 12:1 infrared temperature gun from Harbor Freight (the $22 model) and couldn't find a stand or holster for it so I designed…
Simple housing for a KY-022 Infrared Receiver Module The hole for the actual receiver is 9x9mm This was modeled off a module measuring 15.4 x 24.18 x 15.69mm. (This includes the pins and receiver) Print Settings Printer Brand: Creality…
Slight adjustments for the Mestek Thermometer.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Support needed! I used 4 walls for stability. PLA worked…
Remix to support 20mm IR Thermometer openings.
This pin boot cover is made to fit my Flipper Zero Infrared (IR) Blaster case found at the following locations: https://www.printables.com/model/606855 https://www.thingiverse.com/thing:6106025…
A 4x3x7 gridfinity bin which has a carve out for a Wintact Infrared Thermometer from Amazon ( https://amzn.eu/d/fVUWYlg ). The model is multi-color printable. I actually ment the ‘red’ to be red, but due to a lack of red filament I chose…
small mount for sensor Category: 3D Printing
I was reminiscing about old video games and remembered always seeing this logo when starting up some of my favorite games back in the day. So I found an image turned it into a lithograph then modified it more in Blender.
Rare Spongbob Gold Doubloon
Atomstack R30 infrared laser module model
Accuracy of reproduction +-0,2mm except overall dimensions, which are accurate to the specs. Please note that this camera has manual focus lens with screw ring - 1mm adjustment during use (from 23.8mm to 22.8mm overall length). If you…
A 214mm round bar sign featuring Eagle Rare Kentucky Straight Bourbon Whiskey. I made this for my home bar and figured I might as well share it. Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer.…
I wanted to store an etekcity infrared thermometer, but i don't cad so well. I made a rectangular hole and plopped the thermometer in it. (its model is lasergrip 774).
A 14mm infrared thermometer holder for my Ryobi Thermometer. Designed from scratch to match the Honeycomb Designed and be easy to print but heavily inspired by…
Quick remix of https://www.thingiverse.com/thing:3298390 No supports are needed for pegboard hooks with this design. To achieve this I've simply performed Z height cut. By doing so overall z height has been reduced. Pros - no supports,…
This design was created to accompany my video series on using Magiquest magic wands to control smart home automations, but this case could be used in any application where you need to add an infrared sensor to a D1 mini or D1 mini clone.…
Infrared sensor is most commonly used for object detection and avoidance. The effective range of the sensor is 2 - 30 cm, trimmer (potentiometer) is used to calibrate the sensor for desired range. Operating Voltage 3 - 5 V DC. It can…
Case for HomeKit project for IR remote old devices (television that doesn't support HDMI-CEC, a speaker set that is connected to it or just anything that may be controlled via infrared remote even an A/C) describe on gitlab link .…
Print it standing up, supporless. mount with stickytape at an angle. The thermometer should be laid in a bit.
I designed this printable storage box specifically to store the xTool Infrared Laser Module from my D1 Pro laser engraver. I used the foam from the xTool original shipping box to line the inner walls of my printed box. This was designed…
This is a bracket to attach an InfiRay Xinfrared T2 Pro thermal camera to a pan-tilt light. The purpose is to create a thermal camera turret that can be used on vehicles for spotting wildlife at night. This is meant to be used with 3mm…
This document describes the design and functionality of a bespoke enclosure crafted to house a Raspberry Pi Zero and a Waveshare infrared camera. This enclosure is specifically engineered for attachment via zip ties to a dog's crate,…
A compact infrared reflective sensor for fischertechnik, based on the TCRT5000 reflective optical sensor with transistor output . I needed them for a line-following robot. Use an analog input pin to measure the signal (sensor out pin).…
A mount to fit onto the 'standard' 2WD Chassis Kit seen on Amazon, AliExpress, etc. to be able to mount 2 - 4 Infrared FC 51 sensors. Uses M3 screws to mount to the chassis and the infrared modules Category: Robotics
DJI Robomaster allows you to add the Infrared Distance Sensor on EP but in a terrible position right under the gripper. I tried to tape it with double-sided tape in the front of the hit detector but for better accuracy, the sensor needs…
Remixed Nicorn's design with standard pegboard spacing (25mm). Pegboard part by my bestest buddy Angus! Category: 3D Printer Accessories
Smartmeter infrared read/write sensor case for various smart energy meters used in germany. Parts list: Threaded inserts and M3 screws (2pcs) 5mm Neodymium Magnets (6pcs)
This is a custom IKEA Skadis holder I designed for my no-name infrared thermometer, since none of the existing ones on Printables fit properly. The mount holds the thermometer securely while keeping it easy to grab when needed. The design…
This is a "case" for a battery-powered infrared thermometer with a laser pointer built with a Wemos D1 Mini ESP8266 microcontroller and an MLX90614 sensor. By its data sheet this sensor has high accuracy of 0.5°C over the 0 … +50°C…
Minimal bracket to hold a InfraRed Thermometer from Biltema. Slide it in backside first and rotate it into the position shown in the picture. Mounting 1 M3 Nut 1 M3 Screw 1 Drop-In Nut Weight Bearing Snap M3 (see Drop-In Nut - Weight…
Multiboard Mount for Parkside Infrared Thermometer A compact and practical wall holder designed for the Parkside non-contact infrared thermometer. It’s made to fit perfectly on Multiboard systems and keeps your tool always ready for use.…
Wall mount for Infrared Temp Gun. Holds 2 AAA batterys so not to corroded in gun. works on: menards 84850 Benetech GM321 XRCLIF 520E harbor freight general IRT207
I wanted to protect the device from all the other stuff in my toolbox so I made this. It has an optional lid and spots to store two 9 volt replacement batteries from the device. I made mine out of ABS but I'm sure other materials will…
Use hotglue to stick and stabilized the ir module
Cradle for the iHealth digital thermometer. Probably fits many other brands. They all seem to have a common shape. We have to use ours daily for daycare. Makes it a little cleaner since we keep it on the countertop.
Pegboard Infrared holder for Mastercraft model Maximum 201610. This is for the north American 1" spaced pegboard. Print upside down with supports from table. Nozzle .4 Resolution .2 Hot end 210 Bed 60 Supports yes (from bed)
oleBox system - 3D printed boxes compatible with BITBEAM construction kit (therefore even with LEGO Technics/Mindstorms). The main purpose of MoleBox is covering a particular sensor or the entire module and simultaneously allowing…
Couldn't find a pegboard holder for my infrared thermometer so I made one in Tinkercad. Fits a standard pegboard 25mm. Printed with supports everywhere for the pegs. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Wall mounting of my infrared thermometer holder
3 Medals, Alverian's Honor Cross, Alverian Blue Star, and Alverian Gold Star, Cross is Honor and is purple, center star is gold star, and right star is blue star, cyan Just follow the picture for colors.
The Goblin Shark is a true living fossil, with a lineage dating back over 125 million years. This model captures its unique protrudable jaw and iconic elongated snout. More of my work : https://linktr.ee/marekparnican Thank you for…
I added a little variation of the slatted frame spare part for my bed. I modified the original, adding more depth to the model, and it works. Furthermore, I've printed it with PETG, but the recommendation is doing it with a Flex material.…
EN: This is a Creality Sermoon S1 scan of a chestnut. The scan was created with a resolution of 0.2 mm and blue cross, parallel and single lasers. I also did an infrared scan. — I would be very happy if you have as much fun with the…
Simple Holder for LOMVUM infrared thermometer. Could be mounted by double side tape or two M3 screws. Print Settings Printer: Haribo Rafts: No Supports: No Infill: 20% Category: Tool Holders & Boxes
It is a non-contact thermometer that works with Arduino Nano and GY906 sensor and can measure and record temperatures. The model is completely in draft condition, with serious shortcomings. I have archived it for future reference. This…
INFRARED THERMOMETER - MAGNETIC HOLDER Keep your thermometer in the most handy place! Features Place on Refrigerator and use it for cooking. Stick it to your tool chest! Stick it to your auto (careful) Easy to assemble Easy to print - No…
A mount for an HC-SR501 sensor with cable ties. The mount may be used stand alone or mounted to an 8020 series 10 extrusion. Print instructions Unassociated tags: infrared sensor mount Category: Electronics
This model captures the majestic Sawfish, a fascinating creature that looks like it belongs in a prehistoric era. Featuring its unique saw-like snout and sleek, hydrodynamic body, this model is a great addition for any marine biology…
¡Lleva la acción y la nostalgia de Fortnite del mundo digital al físico con esta exclusiva colección de sprites 3D! Diseñados con un estilo pixel art único en 3D, estos modelos capturan la esencia de tus personajes y objetos favoritos del…
Bring the rarest aquatic companion from the blocky universe right to your desk! This model features the iconic Ultra Rare Blue Axolotl (the famous 1-in-1200 secret variant!). Designed with clean, sharp voxel geometry, bright golden-amber…
This is a gamepad case for my Radio Shack Make: it Robotics infrared remote controller (Amazon) (Radio Shack #2770168) The buttons are labeled to be used for an Arduino rover with an ultrasonic sensor and three servos. So it moves the…
Remix to support 16mm to 18mm IR Thermometer openings. I make it in two parts. The first is printed in PLA and the second in TPU I glue them together…
This is the Open Source version of the E-by-J Infrared Camera. This is a complex DIY project that requires exact electronic components, wiring, and setup commands. Note that throughout much of 2020, the increased demand for thermal…
My take on a Skadis infrared thermometer holder
I needed a project box for my combo IR Transceiver and Micro USB board. A few hours and a lot of test prints later and here it is! Hope you like it. Nice and compact. Printed in Polymaker PolyLite Clear PETG so I wouldn't need any…
Self retaining dust cover for Parkside PTI 380 C2 Infrared Themometer. Your printer should be well calibrated in order for the dimensions to fit correctly.
This is a rare BCFerries vessel, like no other, somewhat unusual…
I have a completely enclosed Ender 5 S1 (Creality official enclosure parts) running Klipper off a Pi 3. It is dark in there for a camera, and there are few useful mounting points to see the first layer without interfering with moving bits…
Winglet für HK Rarebear Funfighter oder Robbe Nano Racer. Muss etwas angepasst werden. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1JJWJoXAyol Print Settings Printer: Anet A8 Rafts: No Supports: No…
I didn't like any of the cases available for the IR Toy v2 which I was able to find on Thingyverse, so I went ahead and created my own case. The advantages of this compared to others is that it is not oversized, allows good IR reception,…
Skadis board Mestek Infrared Thermometer holder, the original file had a smaller shaft, which caused my thermometer to fall down from the board. if you do want to support me feel free to donate a cup of coffee
This thing holds a 5 mm LED to the optical transmitter of our Voltcraft VC850 digital multimeter. It should be compatible with VC820, VC830, VC840, VC850, VC870, VC920, VC940, VC960. It might even work for the corresponding UNI-T DMMs. I…
Angled support for a garage door infrared barrier ( ABO-20L ) Category: Other
The original design was superior to most other models as it takes up less space on the Skadis board and has the handle out for easy grabbing. However, it was for one specific brand/model of thermometer gun and didn't work with mine, a…
A minimalist case for this esp8266 infrared module you can find floating about on Aliexpress. No screws/glue required, it's just snap fit. I recommend transparent PETG for the greatest aesthetic (but PLA works too). I use it with…
Pot with lid and reservoir to minimize evaporation and maximize watering intervals for 100×∅100mm pots
The remote control box for the infrared heater, made in such a way that it can be stuck on the wall under the heater and can be operated by pressing the buttons directly on the wall. Fits exactly on the remote control for the Cattara…
I required a small compact holder for my cheap infrared camera. to mount it between my print head and enclosure back wall. This gives a decent view for the required space. NOTE: Check the provided drawing if your camera has the right hole…
Other materials such as pictures
Designed by Printable Concrete , pictures taken on site at Budapest Studios Old style paddle holder for older Bombard inflatable dinghy boat. This is a drop in replacement for the older style Bombard oar holder, but is designed to be much…
This sign is a joke because it is not tidy. No supports print time around 4hrs
Pic 3 is of the remote in question, mine is for an Infrared Patio Heater, but there are probably loads of other products that use the same infrared remote. It fits either of the IKEA Hol tables. You need a little bit of support to print…
This is a 3D printable toy, the front wheels actuates the head and the back shaft can be configured to actuate the tail. it is possible to attach 4 N20 geared DC motors to the unit or two plane shafts can be used for the wheels. In my…
Adapter for mounting USB optical head for energy meters OR-WE-516, OR-WE-517 -Operates in IEC 62056-21 (IEC1107). Compatible with CP2102 Micro USB to Near Infrared IR Optical Magnetic Adapter Converter Cable for Electricity Meter Gas…
