1 / 2
Mini screwdriver handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handle for short 3mm screwdrivers, for example from Goosky or several Aliexpres vendors.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
3D printed handle for short Goosky (or other) screwdrivers.
Printed from PLA, 15% infill, 2 perimeters. You may need to clean the hole with a sharp 3mm drill (use VERY low RPM or spin it just by hand), depending on your printer calibration, etc. I used an M3 tap to cut threads in the PLA and then soaked them with thin CA.
You will need an M3x6mm screw. A button head looks best, but any other will do as well.