1 / 2
Mini screwdriver handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handle for short 3mm screwdrivers, for example from Goosky or several Aliexpres vendors.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
3D printed handle for short Goosky (or other) screwdrivers.
Printed from PLA, 15% infill, 2 perimeters. You may need to clean the hole with a sharp 3mm drill (use VERY low RPM or spin it just by hand), depending on your printer calibration, etc. I used an M3 tap to cut threads in the PLA and then soaked them with thin CA.
You will need an M3x6mm screw. A button head looks best, but any other will do as well.