Improved food/anything syringe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Whilst playing around with previous designed realised better alternative to adapt existing silicon gun
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 1112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
This is basic “gun” to force stuff out a various shaped nozzle. Meant to replace an icing bag that can't handle much pressure. You can use it for food (potato/any kind of similar food, playdough, cement, mud, plaster.
Was fiddling with previous design and struggling to get enough press when realised would be a whole lot easier to adapt a cheap silicon gun. Most people probably have something similar lying around that that used once for a DIY project. If not they can be purchased for as little as $2 from your hardware store.
I had two versions of these ‘cheap’ guns. One you could bend the rails out of the way to fit a 600ml PET bottle but this was quite hard. The other version seemed to offer a better bolt on solution.
I removed the silicon holder with a hacksaw, filing the rough edges off. The 3d print then bolts on with 4mm x 30mm nuts and bolts. Thats pretty much it.
There are probably many other types of gun that a similar system can be adapted to but hopes this inspires others.