Improved food/anything syringe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Whilst playing around with previous designed realised better alternative to adapt existing silicon gun
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 63
- Makes
- 0
- Views
- 1,112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
This is basic “gun” to force stuff out a various shaped nozzle. Meant to replace an icing bag that can't handle much pressure. You can use it for food (potato/any kind of similar food, playdough, cement, mud, plaster.
Was fiddling with previous design and struggling to get enough press when realised would be a whole lot easier to adapt a cheap silicon gun. Most people probably have something similar lying around that that used once for a DIY project. If not they can be purchased for as little as $2 from your hardware store.
I had two versions of these ‘cheap’ guns. One you could bend the rails out of the way to fit a 600ml PET bottle but this was quite hard. The other version seemed to offer a better bolt on solution.
I removed the silicon holder with a hacksaw, filing the rough edges off. The 3d print then bolts on with 4mm x 30mm nuts and bolts. Thats pretty much it.
There are probably many other types of gun that a similar system can be adapted to but hopes this inspires others.