Gridfinity Alex drawer tray grid (economic variant)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray that makes it easy to remove bins on the front of an Alex drawer, so you can slide and access the ones on the back!
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 1940
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers.
This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!
There are other designs for this around the internet, but I've found them to require too much material and time for this purpose. This one was designed to be simple and economical, not requiring much more material than usual gridfinity magnet grids.
Just print two of the tray parts (its the same part for both sides), print four connectors and glue them. You can also insert filament into the connectors for extra strength, but if the glue is good it probably isn't needed.