Meteor75 Pro "Food Box" Field Kit Insert

Turn a standard food container into a professional, organized carry case for your BetaFPV Meteor75 Pro! This modular insert is designed to keep your whoop, power, and charging gear secure and rattle-free while traveling to your favorite flight spot.

I designed this because retail cases are often too bulky or expensive. By repurposing a common food storage box, you get a lightweight, rugged, and "incognito" case that fits perfectly in a backpack.

Video

✨ Features

• Custom Fit: Specifically measured for the Meteor75 Pro (75mm frame).

• Battery Bank: Dedicated slots for 6x 1S batteries (Optimized for BT2.0 450mAh/550mAh sizes).

• Eco-Friendly: Designed to fit inside a repurposed food container

📏 Compatibility & Requirements

The Box: This adaptor was designed to fit a [Insert Brand/Size here, e.g., 1.2L Sistema or Lock&Lock] food container.

• Internal Dimensions Required: 110x110x50

The Gear:

• Drone: BetaFPV Meteor75 Pro.

• Batteries: 6x 1S LiPo (BT2.0).

• Charger: Standard 1S USB charger stick.

🖨 Recommended Print Settings

• Material: PLA or PETG. (If you leave your kit in a hot car, use PETG to prevent warping).

• Infill: 10-15% (Gyroid). You don't need much strength; it's mostly a divider.

• Walls: 2 loops.

• Support: None required! (Designed with 3D printing in mind to avoid waste).

🛠 Assembly

1. Print the adaptor.

2. Test it by fitting it inside your food container. (If it's a tight fit, you can lightly sand the edges).

3. Load your Meteor75 Pro, 6 batteries, and your charging cable.

4. Glue the main body with an enforced bracket.