ANKO Crevice tool for 2 in 1 stick vac
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a crevice tool for the K-Mart Australia ANKO 2 in 1 cordeless stick vac model number EV-PH006-W111
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a crevice tool for the K-Mart Australia ANKO 2 in 1 cordeless stick vac model number EV-PH006-W111
The included tool was kinda useless so I created one similar to the Dyson handheld nozzle. I have included a version with a heat insert (m3 x 4) and a version to thread direct into the plastic. The heat insert version will be sturdier.
Printed the body in Sunlu white PLA+ and the clip in Sunlu grey silk PLA+ any PLA+ or PETG will be fine may want to scale it up slightly ( like 1% X and Y) if using ASA/ABS due to shrinkage.
0.2 layers
3 walls
4 top layers
4 bottom layers
30% infill (not that important with this model)
Hope this helps someone.