IKEA CITRONHAJ Spice Jar Holder (2×2) - Drawer / Shelf Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4-slot (2×2) IKEA CITRONHAJ spice jar (35cl version) organizer for drawers and shelves - no supports.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A compact organizer designed specifically for IKEA CITRONHAJ spice jars.
It stores 4 jars total in a 2×2 grid, keeping labels facing forward and preventing jars from rolling around in a drawer.
This is the 35cl version!
You can find the version for the 2x4 10cl IKEA CITRONHAJ here!
This is a free‑standing holder (no screws, no magnets) - just place it in a drawer or on a shelf and load it up.
If you need any other size, please let me know in the comments!
Size / Fit
Holder size (empty): 92 mm (height) × 159 mm (width) x 100 mm (depth
Height when fully loaded with jars: ~159 mm (good to know for drawer clearance)
Features
Made for CITRONHAJ jars for a clean, consistent look
Compact 2×2 layout with easy access to each jar
Drawer-friendly: keeps everything aligned and tidy
Simple print with a minimal, modern design
Print settings (recommended)
Layer height: 0.20 mm
Perimeters/Walls: 3
Infill: ~5% (Gyroid / Grid)
Supports: None
Orientation: print with the back side facing down on the build plate
Ironing: ON (for a cleaner top surface finish)
Brim: optional (only if you need extra bed adhesion)
Material notes
PLA: best for indoor use in a closed space (drawer/cabinet).
PETG/ASA: recommended if the holder may be exposed to direct sunlight or higher temperatures.
Notes
Printer tolerances vary; if the fit is slightly tight/loose, try ±1–2% scaling.