1 / 2
IEC320 C14 Fused Switch Enclosure for 4040 Extrusions — zdjęcie 1
1 / 2

IEC320 C14 Fused Switch Enclosure for 4040 Extrusions

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An enclosure allowing for the mounting of one type of fused IEC320 C14 port with a switch to a 4040 extrusion.

Ocena
0 / 5
Polubienia
21
Pobrania
49
Wydruki
0
Wyświetlenia
283
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I relocated the power supply underneath the bed on my Anycubic Mega SE, and removed the cheesy plastic endcap they used that also held the power plug, fuse, and switch mount. This is a simple box to hold the IEC320 C14 fused power socket and switch, that fits inside the footprint of a 4040 extrusion so I could relocate it back to where the PSU used to be.

A word of caution: there's a lot of these kinds of switches, and they come in a bunch of different footprints, even for sockets that look the same. Double check the measurements of your socket against this model to make sure it'll work for you.

The 3mm holes on the bottom are available for attaching it to the extrusion with 3mm screws and t-nuts, and it prints in two parts to make attachment, assembly, and wiring easier. There's a port on the lower back, close to the extrusion, for the cabling to pass through. The cabling inside will be a tight fit front-to-back; you'll want to arrange/bend the wiring and clips as needed before you try to attach the lid, or they'll press against it and cause it to bow outwards.

The main box will need to be printed with supports, and the STL should be oriented correctly for printing: face-down (the opening for the outlet/switch should be on the bed). The lid only needs supports if you print it on it's side; as long as one of the faces are down, you won't need them. Up to you how you want to orient it.

Four M3 heatset inserts for the lid attachment on the forward-top and lower-back, two M4 inserts on the front for the outlet/switch. I used button-head screws for everything, although it might be a better idea to chamfer the lid holes and use countersunk screws. Feel free to remix. 😉

The CAD file includes @AxelDnz_936589's excellent IEC320 C14 power socket model for mockup purposes, since it's very similar to mine. Don't print that. 😉

Tagi