1 / 2
Retainer for Prusa MK3S + Mosquito + LGX — zdjęcie 1
1 / 2

Retainer for Prusa MK3S + Mosquito + LGX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Uses the existing screw mounts to retain the filament sensor so it does not pop off.

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I was tired of the silly filament sensor housing constantly popping off or just getting pulled off the mosquito+LGX on my mk3s. 

This uses the existing screw holes (just with 2x M3x10mm) screws to add a very light (~4g of PETG) retainer to hold down that filament sensor box.  This works with the official box, or the ones you can print from here.  Step and STL files included.  

Easy print, no supports needed, no raft, no brim, no nonsense.  Pretty simple, not sure why something like this was not part of the upgrade kit.

Printed in 0.2mm layers, PETG

If you need a sensor housing: https://www.printables.com/model/423029-lgx-filament-sensor-v2/files

Tagi