1 / 2
Retainer for Prusa MK3S + Mosquito + LGX — image 1
1 / 2

Retainer for Prusa MK3S + Mosquito + LGX

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Uses the existing screw mounts to retain the filament sensor so it does not pop off.

Rating
0 / 5
Likes
2
Downloads
7
Makes
0
Views
52
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I was tired of the silly filament sensor housing constantly popping off or just getting pulled off the mosquito+LGX on my mk3s. 

This uses the existing screw holes (just with 2x M3x10mm) screws to add a very light (~4g of PETG) retainer to hold down that filament sensor box.  This works with the official box, or the ones you can print from here.  Step and STL files included.  

Easy print, no supports needed, no raft, no brim, no nonsense.  Pretty simple, not sure why something like this was not part of the upgrade kit.

Printed in 0.2mm layers, PETG

If you need a sensor housing: https://www.printables.com/model/423029-lgx-filament-sensor-v2/files

Tags