Snapmaker U1 Toolbox Tray - Repaired & Optimized for Snapmaker U1 Starter Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Technical repair of the geometry and material-efficient optimization (only ~81g) for the Snapmaker U1.
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 881
- Wydruki
- 4
- Wyświetlenia
- 2885
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix is a technical refinement of the original toolbox tray, specifically tailored for Snapmaker U1 users.
Key Enhancements:
Fixed Geometry: Repaired 82 non-manifold edges for error-free slicing.
Ultra Material Efficient: Reduced weight to only ~81g (from originally much higher estimates). It's now perfectly safe to print with the 500g PLA starter spools.
High-Speed Profile: Optimized for a 1h 45m print time using 0.28mm layer height.
Recommended Settings (included in the .3mf):
Infill: 10% Lightning (essential for filament saving).
Walls: 2 perimeters (Arachne wall generator).
Support: Tree (Slim) for minimal waste.
Note: Please use the provided .3mf file as it contains the repaired geometry and all optimized settings.