Powder Shaker Desiccant Holder Spool adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter fitting amazon (and probably Slice) powder shaker style desiccant holders to Polymaker style spools.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I didn't like the way the metal powder shakers from Amazon sat inside Polymaker spools. So I made this holder/adapter to fit it better. Tolerances a bit tight but should fit anything that approximates a Polymaker spool and the powder shakers linked below. This might fit Slice's desiccant holder as well.
Why use these powder shakers if they don't fit my spools? Because I use the activated alumina desiccant and I wanted to be able to dry out the desiccant in the metal holder without making a mess.
Print recommendations: As oriented no supports. ABS works fine but you can probably use other types as well. I printed these with a 0.6 nozzle at 0.24 layer height but I don't think the model will suffer at other settings.
Example Powder Shakers that fit: https://www.amazon.com/dp/B0B4JWGTTT