Ikea Grillskär Door Magnet Top Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount the Ikea Grillskär stock magnets at the top.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 147
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is a snap-fit mount to place the Ikea Grillskär door magnets at the top frame instead of the middle shelf.
Printing tips
Print it laying on its side
0.2mm layer height
2 perimeters
PETG recommended
Other parts needed
Original Ikea Grillskär door magnet assembly
Assembly
Put the metal back plate of the original magnet assembly into the recess on the backside of the print.
Put the original plastic spacers into the circular slots on the front.
Screw the magnets through the plastic rings and print into the back plate.
Snap the finished assembly into the center of the Grillskär top frame, such that it fits into the C-shaped cut-out in the frame. The notch at the top should snap into the screw hole in the frame and hold it firmly in place.