Desktop Weather Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact desktop weather display with temperature and humidity sensors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — NoDerivatives
A compact desktop weather station enclosure designed to house temperature, humidity, and barometric pressure sensors with a small OLED display. The enclosure is sized for a clean, desk-friendly footprint and supports USB-C power with space for a backup battery.
This model is part of a complete, buildable hardware project with validated parts, wiring, firmware, and step-by-step assembly instructions.
👉 Full build (parts, wiring, code, and assembly):
https://modo.is/b/weather-station
Description
This is a 3D printable enclosure for a desktop environmental monitoring device featuring:
Temperature, humidity, and barometric pressure sensing
Small OLED display for live readings and trends
USB-C power input
Internal mounting for MCU, sensor board, and display
Venting designed for accurate environmental readings
The enclosure is intended for desktop use, with a simple two-part design (front + rear) that assembles using standard hardware.
The full project includes:
Validated bill of materials (real components)
Wiring diagram
Firmware scaffolding
Assembly instructions
Those resources are maintained on the linked build page.
Printing Notes
Material: PLA, PETG, or ABS
Layer height: 0.2mm recommended
Infill: 15–20%
Supports: Not required
Orientation: Print front and rear shells flat
PETG or ABS is recommended if the device will be exposed to warmer environments.