Desktop Weather Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compact desktop weather display with temperature and humidity sensors.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — NoDerivatives
A compact desktop weather station enclosure designed to house temperature, humidity, and barometric pressure sensors with a small OLED display. The enclosure is sized for a clean, desk-friendly footprint and supports USB-C power with space for a backup battery.
This model is part of a complete, buildable hardware project with validated parts, wiring, firmware, and step-by-step assembly instructions.
👉 Full build (parts, wiring, code, and assembly):
https://modo.is/b/weather-station
Description
This is a 3D printable enclosure for a desktop environmental monitoring device featuring:
Temperature, humidity, and barometric pressure sensing
Small OLED display for live readings and trends
USB-C power input
Internal mounting for MCU, sensor board, and display
Venting designed for accurate environmental readings
The enclosure is intended for desktop use, with a simple two-part design (front + rear) that assembles using standard hardware.
The full project includes:
Validated bill of materials (real components)
Wiring diagram
Firmware scaffolding
Assembly instructions
Those resources are maintained on the linked build page.
Printing Notes
Material: PLA, PETG, or ABS
Layer height: 0.2mm recommended
Infill: 15–20%
Supports: Not required
Orientation: Print front and rear shells flat
PETG or ABS is recommended if the device will be exposed to warmer environments.