IKEA BILLY Shelf Cable Pass-Through (larger canal remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remox of the shelf pass-through by @reivaxy with an extended canal for larger plugs
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
A remix of the extremely smart cable management solution by @reivaxy - cut out a corner of the BILLY shelf and route the cable through it.
I had to fit a printer power cable through and wanted to make sure that I could remove it afterwards without disassembling the BILLY. So I made a slightly larger version. The drawback is that it slightly covers the hole for one of the dowel pins in the fixed board locations. I added a negative volume in prusaslicer to make space for the dowels.
My version assumes a thickness of ~20 mm for the shelves - my extra-deep 2025 BILLY needed this. Others may be fine with a smaller distance, in which case, you can measure it and create your own version based on the model on OnShape. (Change the distance on the first extrude operation)
All credits go to @reivaxy for creating the original this is based on, and for sharing it under a license that allows me to remix it. ❤