Third Stage Blade Mount for PW-F100-229
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For mounting a blade to plaques for retirements and going aways
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Blade mount for attaching a third stage blade from a F100-PW-229 jet engine to plaques for going aways and retirements.
Requires 4 tapered threaded inserts which I got from McMaster-Carr. Item numbers 93365A140 & 93365A156. You will need two of each.
The design also includes a drill guide to make drilling the holes easier, and a indexing square that you can put the drill guild in to make sure that the mount is square (since the mount is not flat on the sides) to the plaque that your attaching it too.
Prints without supports, and I normally use 3 perimeters for strength along with about 15% gyroid or cubic infill.