Liczymy pasujące modele…
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
A box for the Wolfbox MF100 air duster and all of its accessories. Includes a notch in side of box to charge while in the box. I left it text free - emboss whatever text you might want on the lid using the slicer :) The hinges/latches…
1956 Ford F100 Pickup - Stylized 3D Print This is a high-quality 3D printable model of the iconic 1956 Ford F100 Pickup . Designed with a clean, stylized look, it’s a perfect project for classic car enthusiasts and makers alike. Key…
A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…
I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…
rotated the honeycomb pattern to make it easier to print
This is the EMF100 file from planet eclipse modified to have no feedneck option, a shorter frame, and full railing across the top. Made easy for mods. I printed my version in carbon fiber filament, Super light weight and it has lasted a…
I needed a way to store my wolfbox duster laying sideways so it would fit in the tool chest. Drew this little guy up in F360 to get the job done. 4x4 base and 10U high.
A gridfinity bin to hold the MF100 air duster and all accessories!
The printed ones on ebay have gotten quite expensive. This is intended as a cheap (temporary-ish) fix to get your walkman powered quickly. It was printed with no support or brim. 2mm layer height. PLA only so far. - Does not Fit Sony…
escala 1:43 usar ejes metalicos 2mm,,,, clip escolar n8
I found this great template and decided to make a holder for my duster. Pretty basic but seems to work.
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
News, 28.03.2020: I have now added three version of the Extrudermount, the recent one is the one with BMG in the title, and was designed around a BMG clone extruder, but should fit regular BMGs as well. Also added the missing…
This set of models will allow you to mount this 5-port switch vertically (flat) against a wall using household fasteners. The first model is for hanging the switch body. This is a snug fit, but does not cover the front ports. This allows…
1962 Ford F100 Unibody, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
Best printed in ASA or ABS. Fits perfectly for the CRF1000L. Also needed: x4 M5 Nylock Nuts (DIN985) x4 M5x16 Screws (DIN912) x1 M4x12 Screw with shallow head (DIN7984) 03-Jun-2025: Updated model with a slightly smaller hole for the…
LMP style rotary encoder caps for the Thrustmaster SF1000
TP-Link TL-SF1008 industrial switch rack plate. Compatiable with DeskPi Rackmate series: T0/T1/T2 Good Heat dissipation Easy to assemble Wire slot opened on both sides. Free. Version: V0.2
This is a modified lid insert that removes some parts to make room for the strap that comes with the air duster.
I purchased both the NiteCORE CW20 and the WolfBOX MF100. The NiteCORE quality is leaps and bounds better although slightly less powerful / cfm. I modeled the 12mm tip after the WolfBOX and still wasn't as happy, so I remixed the 10.5mm…
A little holder for your TP-Link TL-SF1008D eight port ethernet switch. You can conveniently slide the switch in and have it secured by the clip. Pulling on the ethernet cables only pulls the switch tighter into the mount, not out of it…
I found the available fan-attachments for the RF100 take up to much space around the printhead, and also sometimes don't produce enough airflow. This cooling solution utilizes a radial fan design and can be attached to the printhead using…
u need longer cables than stock, stock psu cable wont be long enough dont forget to scale model, printed mine in PC bottom panel with fan mount also available I do not consent to the sale of this model or any of its remixes in digital or…
Simple Honeycomb holder for the Wolfbox MF100 and its its attachments.
WOLFBOX MF100 mount for Multiboard. Use Auto Tree supports from plate. Attach with 9 mm Small Thread, Flat Head, T-Bolt
This is a remix of Oliver_Ds cooling duct for the RF100 V2. Print instructions Category: 3D Printer Parts Summary This is a remix of Oliver_Ds cooling duct for the RF100 V2. Print Settings Rafts: No Supports: No
Just in case you're tired of printing useful things, here's something slightly pointless. A nozzle for the Wolfbox MF100 blower (as seen on Project Farm youtube channel; video1 and video2 - and others!) that replaces the mouthpiece for…
This is a simplified, wooden model of a 1954 Ford F100 Pickup Truck, inspired by ZenziWerken's CNC models. It is designed to be milled from 8mm plywood. For the axles 4mm aluminium rod is required. Important Note: This model cannot be cut…
Print with the front side down, requires minimal supports.
This is a simplified, wooden model of a 1954 Ford F100 Monstertruck, inspired by the famous Tamiya RC model "Midnight Pumpkin". It is based on my F100 Pickup Truck and designed to be milled from 8mm plywood. For the axles 6mm aluminium…
Replace your old NP-F100 & 200 batteries with a Sony A6xxx battery. You will need : -x4 blade terminals 6mm (2 regular and 2 half-cut →3mm)) -x2 Electric wire -x5 10mm M3 screws Printable without support (be careful to orient the parts…
Wallmount for TP-Link - TL-SF1005D 5-Port Desktop Switch (103,5mm x 69,5mm x 22mm)
It's a push fit, not a snap. Quick and dirty remix, so some post processing may be necessary to get it to fit in the holes.
Simple Honeycomb holder for the Wolfbox MF100.
Print with supports. Adjust XY Size Compensation/Horizontal Expansion for a looser fit.
I made this model, first in years and my first design in Tinkercad. It allows the mounting of Coast CF1000R 1000L LED Rechargeable Flashlights that are currently sold in 3pks at costco. Design allows for the use of screws or zip ties.
Needed to replace a cover that didn't fit after installing OutbackMotortek crashbars on my motorcycle. Printed using ASA filament then painted using a high heat paint. I was impatient and rushed the finish job.
I needed a plate to mount a Givi Trekker Outback on the back of my 2018 Africa Twin, but didn't like the way the Givi/Kappa system worked in the SR1162 adapter kit, so I decided to design my own plate and get it laser cut. Step file and…
I have a 2001 Land Rover Discovery II SE7 that was missing the spacers for the 3rd row seat passengers. The part (# EYF100250) is no longer available from Land Rover, so I made my own in Fusion 360. Print Settings Printer Brand: MakerBot…
A Gridfinity 1x2 holer for Wolfbox MF100. I did use reference from other Author
This printer doesn't come with parts cooling stock, only with a hotend fan that will switch on at 50C. In order to make this work properly, you will need to modify your RF100 further. In the stock situation , the fan is wired to the…
remix of the offset bracket slightly changed design for better 3d printing dont forget to scale before printing
A compact holder for TPLink TL-SF1005D Switch that can be mounted on any wall or under desk.
The Renkforce RF100 is really an interesting little machine, sturdy, cheap and comes with a set of tools for printing - tools which would soon be found all over the place. Time to do some tool management. This Toolholder is small enough…
Meet the Benchy SF1000 — a wild fusion of racing adrenaline and nautical adventure! 🚀⛵ This bold creation transforms the classic 3DBenchy into a high-octane, Formula 1-inspired speed machine, complete with sleek aerodynamic wings, chunky…
Remix of @ripley’s Honeycomb Storage Wall – Wolfbox Air Duster Storage to fit the GOEWS mounting system. This GOEWS Wolfbox MF100 Holder keeps the same form-fitting cradle for the Wolfbox MF100 air duster but swaps in 2x vertical GOEWS…
I used this with the Threadboard system so I can add it to my butcher blocks, close to my printers. I noticed when making it and testing, some attachments are bigger than others. This makes it difficult to get all the slots to fit…
This is a complete set of replacement buttons for the Thrustmaster SF1000 add-on wheel . The original buttons rely on stickers that often peel off or fade. To improve durability, I recreated the buttons as 3D printed parts with separately…
You can support my works here: buymeacoffee.com This is a custom offset SFX PSU mount for the NCASE M2 Grater. It was originally designed around my Cooler Master V850 SFX PSU. I have also included a separate version for Corsair SF1000 PSU…
Compact solution for part cooling, use a 12V 40x40x10 radial fan and wire it to the existing fan in parallel. You need a slightly longer screw, the original is too short to hold it in place. The mount aligns with the lower edge of the…
This is just a jet that I made up on my own time for fun. Great prop for toy soldiers. Leave a like pls.
No supports .20 resolutions
This bracket is meant to help better secure a Corsair SF1000 to the back panel, in combination with the original mounting bracket. Keeps the PSU in place when only able to use 2 mounting screws. ***Not yet tested, may not work as…
Small fixation for the Renkforce RF100(XL) magnets. Print Settings Printer: Renkforce RF100XL Rafts: No Supports: No Resolution: 0,2 Infill: 100% Category: 3D Printer Accessories
Remix of the camera mount to attach my camera to the printer. You need to open the small screw at the bottom of the camera, then you can simply screw it to the ball mount. Slot for cable included. Print and enjoy the view. Didn't need any…
You can use this on your own, or with the attachments included on this model page: https://www.printables.com/model/1357249-wolfbox-mf100-attachements-threadboard-mount. If you use this, READ BELOW: This mount requires a very specific…
Mine was missing and the replacement cannot be purchased, so designed this one and printed it in PC. PETG might be strong enough as well Replaces original part: 17921-881-000 Material: PC/PETG Layer: 0,2mm Supports: No (rotate model to…
I remixed the excelent model of @Filamentalist. I suppressed the honeycomb part and added a Skadis hook. Print advises: 3 perimeters Print in PETG Supports recommended
Adjusted the C270 mount to fit the Genius Widecam F100. Print instructions Category: 3D Printer Accessories Summary Adjusted the C270 mount to fit the Genius Widecam F100. Print Settings Printer Brand: Prusa Printer: I3 MK3S </div> Rafts:…
This is a pair of IO shields for the IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis. Both a blank one and a plate with cutouts for a N150 NAS/Router board "10G 2*i226-V 2.5G 3LAN NAS Motherboard" as seen on…
3M除氯蓮蓬頭濾心提換頭，需要原本濾心，切除原本濾心接頭替換。 替代項目: 1.除濾球 2.水族箱過濾海綿 youtube: my blog : 3M Sower care SF100-F DIY
Raspberry Pi Kamera 5mp Category: 3D Printing
Replacement for the part that nozzles snap into. If you want to print upside down for a better surface on the visible side you will have to file down the little notches that keep the nozzle in place. This is my first CAD model since high…
Currently the slots in the back are sized for some random HDD magnets that I had around. The step file is included, so feel free to add wall mounting holes, a hook or whatever you need :)
Genius WideCam F100 Ultra Wide Angle PC Holder
As my search for a motorcycle alarm holder plate was not successfull I made it myself using my motorcycle seat to create this. The plate is located under the seat of the Honda Africa Twin SD06 (maybe it also fits other models but I don't…
Remix that fits Renkforce RF100 with official enclosure. Bolts to original holes in the frame.
Simple adapter for Old Air Products to allow 2 connections into the rectangular Defrost vent. I used the Stapes to hold it in place, it fit under the 2 on the long side, and sits on top on the 2 on the short side. It also fits very snug…
Acquired a WolfBox MF100 extremely powerful air duster based on Project Farm's Youtube review and was not disappointed. Luckily when not in TURBO mode it will stay on indefinitely in its low and Medium settings which is still alot of air.…
~~~!!!WARNING - LITHIUM BATTERIES. If you don't know what you're doing with these type of cells please do not attempt this until you've properly learned. Do your research, you can cause fire or explosion if you are not careful. Take your…
Wolfbox MF100 Air Duster Case Box Lid with Logo. Took the model from this post: and added the wolfbox logo to it, didn't change anything else. No other changes. One version for INDX or multicolor printer and an embossed version for single…
****Work in progress ############################ UPDATES ################################ 2/13/21 - Updated the 53 Cluster to #16....One of the LED holes was not center with the bottom indent 2/11/21 - Updated the 53 Cluster STL. Several…
I needed a replacement knob. The old one was lost somewhere. PLA, 5 minutes print on Flashforge 5M. Infill: 15% Ghyroid internal print. No supports needed, brim advised 5 mm.
This is a simple wall-mount I designed for the Saeshin America F100A/F100AIII control unit. Version 1 works well and holds the unit securely. I printed it on my K1C using PCTG with basic settings. I added mouse ears for bed adhesion, and…
EN | Replacement Piston Column Frame for Scheppach Log Splitters This is a heavy-duty replacement frame/guide ring around the main piston column for Scheppach hydraulic log splitters. The original plastic frames are prone to cracking from…
Tool-free, stay-on front fork preload adjuster knobs designed specifically for the Honda Africa Twin CRF1000L (2016-2019). These knobs press directly onto the factory 19mm hex preload nuts on top of the fork caps. Once installed, they…
## WOLFBOX MF100-Compatible Air Duster Organizer A compact desktop storage stand designed to hold a WOLFBOX MF100 electric air duster together with all four nozzle attachments supplied with the unit. I designed this because I wanted the…
I removed the slots in the back and added nine spots for 10x4mm magnets. You probably only need the four corners though.
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
A Gridfinity 1x2 holer for Wolfbox MF100. I did use reference from other Author
u need longer cables than stock, stock psu cable wont be long enough dont forget to scale model, printed mine in PC bottom panel with fan mount also available I do not consent to the sale of this model or any of its remixes in digital or…
Currently the slots in the back are sized for some random HDD magnets that I had around. The step file is included, so feel free to add wall mounting holes, a hook or whatever you need :)
This is a pair of IO shields for the IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis. Both a blank one and a plate with cutouts for a N150 NAS/Router board "10G 2*i226-V 2.5G 3LAN NAS Motherboard" as seen on…
~~~!!!WARNING - LITHIUM BATTERIES. If you don't know what you're doing with these type of cells please do not attempt this until you've properly learned. Do your research, you can cause fire or explosion if you are not careful. Take your…
I needed a replacement knob. The old one was lost somewhere. PLA, 5 minutes print on Flashforge 5M. Infill: 15% Ghyroid internal print. No supports needed, brim advised 5 mm.
Printed with PLA-CF for toughness and stiffness. Works great with PETG-HF too but more sensitive to impacts.
I needed a plate to mount a Givi Trekker Outback on the back of my 2018 Africa Twin, but didn't like the way the Givi/Kappa system worked in the SR1162 adapter kit, so I decided to design my own plate and get it laser cut. Step file and…
Protective box for my ASTF100 solar filter from Baader. It allows you to store the filter pre-assembled. The box has extra room to put in a pack of silica, which can be screwed close to avoid the silica bag banging around in the case. It…
Genius WideCam F100 Ultra Wide Angle PC Holder
Under-Desk Clip-In Mount for TP-Link TL-SF1005D 5-port ethernet switch. Printing in PETG is recommended.
Small WallMount Clip for the TP-Link TL-SD1005D Desktop Switch Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 20% Category: Computer
This very simple camera mount is meant for a CF100 flange for our PLD system. The camera allows external triggering so once hooked-up with the deposition laser a cool video of the plasma plume can be captured (…
Helps a large filament spool (with a 53mm central hole, 60mm deep) spin smoothly on the RF100 standard spool holder. A 1kg filament spool I have has a rough spindle hole and was snagging once every revolution, producing regular skipped…
Convenient bench stand support for a switch. Ideal for keeping the switch securely attached to the bench without the need for holes or adhesive tape. It allows for easy repositioning whenever needed. To secure the bracket to the base and…
E N G L I S H 10 inch rackmount for TP-Link switches. New cleaner version, easier to print. Switch can be installed screwless. Push in, click, done. D E U T S C H 10 Zoll Rackmount für TP-Link Switche. Neue sauberere Version, einfacher zu…
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for TL-SG108(PE) / SF1006P This bracket is designed specifically for the TL-SG108(PE) / SF1006P switch, offering a clean and secure fit in your 10-inch…
