Third Stage Blade Mount for PW-F100-229
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For mounting a blade to plaques for retirements and going aways
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Blade mount for attaching a third stage blade from a F100-PW-229 jet engine to plaques for going aways and retirements.
Requires 4 tapered threaded inserts which I got from McMaster-Carr. Item numbers 93365A140 & 93365A156. You will need two of each.
The design also includes a drill guide to make drilling the holes easier, and a indexing square that you can put the drill guild in to make sure that the mount is square (since the mount is not flat on the sides) to the plaque that your attaching it too.
Prints without supports, and I normally use 3 perimeters for strength along with about 15% gyroid or cubic infill.