Air Filter Adapter for 2-Cylinder Compressors (Honda/Lifan Filter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to use Honda GX200 air filters on Remeza, Fubag, and other 2-cylinder compressors. Better dust protection.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 217
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
An adapter designed to replace the stock air filters on 2-cylinder compressors (such as Remeza LB30/LB40, Fubag B4000B/B5200B, and similar models) with high-quality, affordable filters from Honda/Lifan utility engines (GX120, GX140, GX160, GX200, 168F, 170F).
The stock filter on my new compressor was barely functional—enough to stop sparrows and gravel, but not dust. This adapter allows you to use a widely available and superior filtering element (~$2).
Hardware required:
Mounting: Use the stock bolts to attach the adapter to the compressor head.
Filter Assembly: You will need one M6x80 bolt and one M6 nut.
Pro Tip: Print an extra M6 nut and glue it behind the bolt head to prevent it from slipping during installation. Or glue the bolt with something else, but not with thermo-glue gun, as it might get melt and sucked into compressor. I also used a printed knob for M6 nut for the top fastener.
Gaskets & Materials:
I cut two 2mm rubber gaskets, but you could simply use high-temp RTV gasket maker on the compressor side. No gasket is strictly needed between the adapter and the filter.
Material: ABS is recommended for heat resistance. PETG might work, but it hasn't been tested for long-term heat exposure.
Slicer Tip: Add the filter model name as embossed text in your slicer for easy reference later.
Print Settings:
Supports: Not required for the model itself. May be needed for embossed text.
Layer height: 0.2mm.
