Stealthburner BackPlate UHF Rapido 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stealthchanger Stealthburner backplate with Mag feet/Pins
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Open Community License v1
Added M3x6 Screws to feet base for Magnets.
Modified top pins to have screws. When installing Pins, easiest way is to manually push the pins in just a little then use the screws to pull them fully into the holes that way they line up very straight. Printing at a scale of 100.2% got me a perfect 39mm on the pins.
Beefed up in areas and increased airflow around hotend
Increased leg Length for UHF design
MODEL V2 - Only change is a little more material added to airflow hole as it does not impede the cooling and only strengthens.
If you happen to download before my most recent model upload, I uploaded wrong model sorry, UHF legs were not extended, that has been fixed. :)
Add your supports, this varies for everyone to play around with the settings until you get it to peel off nicely using the minimal amount of material. Paint them on in orca works best for me.
Recommend Printing in plain ASA. 4 or 5 walls 30% infill. ASA-CF not a good choice for this part.
If wondering this is Ambrosia ASA Galactic Hot Pink or Pink. Can you tell I have a daughter lol.. Happy Printing!
Feel free to support my work with a coffee donation; your kindness is appreciated!
https://www.paypal.com/donate/?hosted_button_id=SE3FMDDLN9ABY