3010 to 4010 Blower Fan Adapter - Dragonburner, A4T, ZeroFilter, etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts a 3010 fan for use in 4010 applications.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 671
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
3010 to 4010 Blower Fan Adapter
My V0.2 kit came with 3010 blower fans for the Mini Stealthburner toolhead, but I built mine with a Dragonburner so I had no need for the 3010 fans. This little box allows you to use those 3010 fans in place of 4010 fans. Obviously cooling power will be diminished over using the proper 4010 fans, but hey, if you already got 'em.
This has the holes to mount with screws in case you need it, but will also slide into toolheads like Dragonburner or A4T.
It would also work to use these in a filter like the ZeroFilter for your V0 or Micron.
Printing:
I used the standard Voron settings, but you probably don't need to.
Make sure your x-y hole compensation is properly tuned. It's a snug fit as is, so any variation here might cause them to not fit, or to squeeze to the point where they rub.
That's it. Pretty simple.